TPS2066CDGN-2

N-Channel 0.65mm PMIC TPS2066 8 Pin 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad

Manufacturer: Texas Instruments
Nocochips NO: 815-TPS2066CDGN-2
Package: 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad
Datasheet: -
Stock: 215
Description: N-Channel 0.65mm PMIC TPS2066 8 Pin 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad (Kg)

Details

Tags

Parameters
Factory Lead Time	1 Week
Lifecycle Status	ACTIVE (Last Updated: 6 days ago)
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad
Number of Pins	8
Operating Temperature	-40°C~125°C TJ
Packaging	Tube
JESD-609 Code	e4
Feature	Status Flag
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	2 (1 Year)
Resistance	84mOhm
Terminal Finish	Nickel/Palladium/Gold/Silver (Ni/Pd/Au/Ag)
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Terminal Pitch	0.65mm
Base Part Number	TPS2066
Number of Outputs	2
Output Type	N-Channel
Max Output Current	1A
Operating Supply Voltage	5.5V
Interface	On/Off
Analog IC - Other Type	SPST
Output Configuration	High Side
Output Current	1A
Voltage - Supply (Vcc/Vdd)	Not Required
Max Supply Current	120μA
Input Type	Non-Inverting
Turn On Delay Time	2.4 ms
Switch Type	General Purpose
Min Input Voltage	4.5V
Max Input Voltage	5.5V
Turn-Off Delay Time	3.25 ms
Ratio - Input:Output	1:2
Voltage - Load	4.5V~5.5V
Fault Protection	Current Limiting (Fixed), Over Temperature, Reverse Current, UVLO
Switching	MAKE-BEFORE-BREAK
Rds On (Typ)	70m Ω
Height	1.1mm
Length	3mm
Width	3mm
Thickness	1.02mm
Radiation Hardening	No
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

TPS2066CDGN-2 Overview

Tube is the way it's packaged.It is included in the package 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad.Surface Mount is the mounting type of the LED driver.There is a General Purpose switch type associated with it.Ensure reliable operation by setting the temperature to -40°C~125°C TJ.By default, it is set to output 2.It uses a supply voltage of Not Required to operate.The maximum output voltage is N-Channel volts.Currently, the LED driving board is equipped with Status Flag features.This object belongs to the TPS2066 family.The operation is carried out using the 8 pins.To comply with the operation criteria, the maximum output current is reduced to 1A.The lighting driver is mounted in the way of Surface Mount.Lighting drivers with 84mOhm resistance are used.The output current is set to 1A in this case.This LED driving board uses an analog IC SPST.In order to maximize efficiency, the supply voltage should be set at 5.5V.Input voltage is limited to 5.5V volts.As a minimum input voltage, it requires 4.5V volts.120μA is the maximum current required to operate it.