TPS2066CDGN
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 8 |
| Weight | 24.408939mg |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Feature | Load Discharge, Status Flag |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Resistance | 70mOhm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Base Part Number | TPS2066 |
| Pin Count | 8 |
| Number of Outputs | 2 |
| Output Type | N-Channel |
| Number of Channels | 2 |
| Interface | On/Off |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Output Configuration | High Side |
| Output Current | 1A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Adjustable Threshold | NO |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Min Input Voltage | 4.5V |
| Max Input Voltage | 5.5V |
| Nominal Input Voltage | 5V |
| Ratio - Input:Output | 1:2 |
| Voltage - Load | 4.5V~5.5V |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Reverse Current, UVLO |
| Rds On (Typ) | 70m Ω |
| Height | 1.1mm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 1.02mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS2066CDGN Overview
As a result, it is packaged in the form of a Tube.There is a package for it in the 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad package.It has been mounted as Surface Mount on the LED driver.It owns General Purpose switch type.In order to guarantee reliable performance, the temperature should be set to -40°C~125°C TJ.It is possible to use 2 outputs in the lighting driver.In order to operate, it requires a voltage supply of Not Required.A maximum output voltage of N-Channel volts can be obtained with this LED driver.As far as features are concerned, the LED driving board has Load Discharge, Status Flag.The TPS2066 family contains this object.The termination count is 8.8 pins are used for operation.The LED driver has 1 functions.As long as the supply voltage is 5V, high efficiency can be achieved.In total, it has 8 pins.70mOhm resistance is present in the lighting driver.When this case is used, the output current is set to 1A.In this case, the analog IC in this gadget is POWER SUPPLY SUPPORT CIRCUIT.The total number of channels is 2.Its maximum input voltage is 5.5V volts.A voltage of 4.5V volts is the minimum input voltage.
TPS2066CDGN Features
Supplied from 5V
Resistance of 70mOhm
2 channels
TPS2066CDGN Applications
There are a lot of Texas Instruments TPS2066CDGN Power Switches ICs applications.
- Low Voltage I/O System Power
- Portable GPS
- USB Power Distribution
- Notebook and Tablet Computers
- Portable GPS Device
- Various applications equipped with buttons
- Portable Video Game Players
- Mobile Communication Devices
- PC Cards
- USB3.1 Power Delivery
