TPS2066CDGNR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Feature | Load Discharge, Status Flag |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Resistance | 70mOhm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Base Part Number | TPS2066 |
| Pin Count | 8 |
| Number of Outputs | 2 |
| Output Type | N-Channel |
| Max Output Current | 1A |
| Operating Supply Voltage | 5.5V |
| Number of Channels | 2 |
| Interface | On/Off |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Output Configuration | High Side |
| Output Current | 1A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Max Supply Current | 120μA |
| Adjustable Threshold | NO |
| Input Type | Non-Inverting |
| Turn On Delay Time | 2.4 ms |
| Switch Type | General Purpose |
| Min Input Voltage | 4.5V |
| Max Input Voltage | 5.5V |
| Turn-Off Delay Time | 3.25 ms |
| Ratio - Input:Output | 1:2 |
| Voltage - Load | 4.5V~5.5V |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Reverse Current, UVLO |
| Rds On (Typ) | 70m Ω |
| Height | 1.1mm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 1.02mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS2066CDGNR Overview
Tape & Reel (TR) is how it's packaged.It's included in the 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad package.The lighting driver is mounted in the Surface Mount position.This switch is of type General Purpose.It is recommended that the temperature be set to -40°C~125°C TJ for reliable performance.The lighting driver has a total of 2 outputs that are available for use.The LED driving board operates with a supply voltage of Not Required.Voltage output is N-Channel volts at maximum.Currently, the LED driving board is equipped with Load Discharge, Status Flag features.It belongs to the family TPS2066.There are 8 terminations in it.It is necessary to use the 8 pins in order to operate the LED driver.The LED driving board has a total of 1 functions.To meet the operation criteria, the maximum output current drops to 1A.A supply voltage of 5V leads to high efficiency.A total of 8 pins are included in this LED driver.70mOhm is the resistance of the lighting driver.As a result, the output current is set to 1A.In this LED driving board, the analog IC POWER SUPPLY SUPPORT CIRCUIT is employed.There are a total of 2 channels to choose from.It is recommended to set the supply voltage to 5.5V for optimum efficiency.Voltage input is limited to 5.5V volts.A minimum input voltage of 4.5V volts is required for this LED driver.For its operation, a maximum current requirement of 120μA is required.
TPS2066CDGNR Features
Supplied from 5V
Resistance of 70mOhm
2 channels
TPS2066CDGNR Applications
There are a lot of Texas Instruments TPS2066CDGNR Power Switches ICs applications.
- Hot Swaps
- USB Ports/Hubs
- Wireless/Networking Cards
- Hot Swap
- PDAs
- Handheld Devices
- Gaming
- USB Power Distribution
- Wireless Headsets
- Smartphone and PDA
