Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 3 days ago) |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
8-SOIC (0.154, 3.90mm Width) |
Number of Pins |
8 |
Weight |
72.603129mg |
Operating Temperature |
-40°C~125°C TJ |
Packaging |
Tube |
JESD-609 Code |
e4 |
Feature |
Status Flag |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
8 |
Termination |
SMD/SMT |
ECCN Code |
EAR99 |
Resistance |
70mOhm |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Additional Feature |
UNDERVOLTAGE LOCKOUT |
Max Power Dissipation |
585.82mW |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
3.3V |
Base Part Number |
TPS2066 |
Pin Count |
8 |
Number of Outputs |
2 |
Output Voltage |
6V |
Output Type |
N-Channel |
Max Output Current |
1A |
Number of Channels |
1 |
Interface |
On/Off |
Analog IC - Other Type |
POWER SUPPLY SUPPORT CIRCUIT |
Output Configuration |
High Side |
Voltage - Supply (Vcc/Vdd) |
Not Required |
Adjustable Threshold |
NO |
Input Type |
Non-Inverting |
Switch Type |
General Purpose |
Min Input Voltage |
2.7V |
Max Input Voltage |
5.5V |
Supply Current-Max (Isup) |
0.09mA |
Nominal Input Voltage |
5.5V |
Ratio - Input:Output |
1:2 |
Voltage - Load |
2.7V~5.5V |
Fault Protection |
Current Limiting (Fixed), Over Temperature, UVLO |
Load Current |
1A |
Rds On (Typ) |
70m Ω |
Drain to Source Resistance |
70mOhm |
Height |
1.75mm |
Length |
4.9mm |
Width |
3.91mm |
Thickness |
1.58mm |
Radiation Hardening |
No |
REACH SVHC |
No SVHC |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
TPS2066D Overview
Tube is the way it's packaged.The 8-SOIC (0.154, 3.90mm Width) package includes it.The lighting driver has the mounting type Surface Mount.The switch type of this switch is General Purpose.Ensure reliable operation by setting the temperature to -40°C~125°C TJ.The LED driver has a total of 2 outputs.The LED driving board operates with a supply voltage of Not Required.A maximum output voltage of N-Channel volts has been specified.In terms of features, the LED driving board has Status Flag.As you can see, it comes from the TPS2066 family.It consists of 8 terminations in total.The 8 pins are used for the operation of the system.The LED driving board has a total of 1 functions.This results in the maximum output current dropping to 1A to meet the operation criteria.High efficiency is possible when the supply voltage is set to 3.3V.It is positioned in the direction of Surface Mount.It is equipped with a total of 8 pins.70mOhm is the resistance of the lighting driver.There is an analog input IC in this gadget, which is POWER SUPPLY SUPPORT CIRCUIT.There are a total of 1 channels to choose from.Input voltage is limited to 5.5V volts.Input voltage must be at least 2.7V volts.With this LED driver, UNDERVOLTAGE LOCKOUT can also be produced.For operation, it can supply a maximum current of 0.09mA.
TPS2066D Features
Supplied from 3.3V
Resistance of 70mOhm
1 channels
Additional features like UNDERVOLTAGE LOCKOUT
TPS2066D Applications
There are a lot of Texas Instruments TPS2066D Power Switches ICs applications.
- Solid State Drivers
- Telecom and Network Systems
- HDD and SSD
- Set-Top Boxes
- Hot Swap
- USB Power Distribution
- Gaming
- Hot-Swap Systems
- Wireless Modem Data Cards
- Portable GPS Device