Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 5 days ago) |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad |
Number of Pins |
8 |
Operating Temperature |
-40°C~125°C TJ |
Packaging |
Tube |
JESD-609 Code |
e4 |
Feature |
Status Flag |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
8 |
ECCN Code |
EAR99 |
Resistance |
70mOhm |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Additional Feature |
UNDERVOLTAGE LOCKOUT |
Max Power Dissipation |
1.7123W |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
3.3V |
Terminal Pitch |
0.65mm |
Base Part Number |
TPS2066 |
Pin Count |
8 |
Number of Outputs |
2 |
Output Type |
N-Channel |
Number of Channels |
1 |
Interface |
On/Off |
Analog IC - Other Type |
POWER SUPPLY SUPPORT CIRCUIT |
Current - Output (Max) |
1A |
Output Configuration |
High Side |
Voltage - Supply (Vcc/Vdd) |
Not Required |
Adjustable Threshold |
NO |
Input Type |
Non-Inverting |
Switch Type |
General Purpose |
Min Input Voltage |
2.7V |
Max Input Voltage |
5.5V |
Supply Current-Max (Isup) |
0.09mA |
Nominal Input Voltage |
5.5V |
Ratio - Input:Output |
1:2 |
Voltage - Load |
2.7V~5.5V |
Fault Protection |
Current Limiting (Fixed), Over Temperature, UVLO |
Rds On (Typ) |
70m Ω |
Height |
1.1mm |
Length |
3mm |
Width |
3mm |
Thickness |
1.02mm |
Radiation Hardening |
No |
REACH SVHC |
No SVHC |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
TPS2066DGN Overview
Tube is how it's packaged.It is included in the package 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad.The lighting driver has the mounting type Surface Mount.It owns General Purpose switch type.It is recommended that the temperature be set to -40°C~125°C TJ for reliable operation.In this LED driver, there are no outputs available.To operate, it needs a supply voltage of Not Required.There is a maximum output voltage of N-Channel volts on this LED driver.The lighting driver has Status Flag features.As you can see, it comes from the TPS2066 family.A total of 8 terminations have been recorded.In order to operate, 8 pins are used.As far as functions are concerned, the lighting driver has 1.There is a maximum output of 1AV from the LED driver.With a supply voltage of 3.3V, high efficiency is possible.In this case, it is mounted in the way of Surface Mount.A total of 8 pins are present on it.70mOhm is the resistance of the lighting driver.This gadget uses an analog IC, which is POWER SUPPLY SUPPORT CIRCUIT in this case.There are a total of 1 channels to choose from.Input voltage is limited to 5.5V volts.The minimum input voltage is 2.7V volts.With this LED driver, UNDERVOLTAGE LOCKOUT can also be produced.For operation, it can supply a maximum current of 0.09mA.
TPS2066DGN Features
Supplied from 3.3V
Resistance of 70mOhm
1 channels
Additional features like UNDERVOLTAGE LOCKOUT
TPS2066DGN Applications
There are a lot of Texas Instruments TPS2066DGN Power Switches ICs applications.
- Portable Music Players
- Set-top-box
- Hard Disk Drives
- Hot Swap
- Hot Swap
- Mobile Communication Devices
- Portable/Handheld Devices
- Wireless Headsets
- HDD, SSD
- Solid State Drivers