banner_page

TPS2066DGNR-1

N-Channel 0.65mm PMIC TPS2066 8 Pin 3.3V 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad


  • Manufacturer: Texas Instruments
  • Nocochips NO: 815-TPS2066DGNR-1
  • Package: 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad
  • Datasheet: -
  • Stock: 843
  • Description: N-Channel 0.65mm PMIC TPS2066 8 Pin 3.3V 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad (Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Lifecycle Status ACTIVE (Last Updated: 1 week ago)
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad
Number of Pins 8
Operating Temperature -40°C~125°C TJ
Packaging Tape & Reel (TR)
JESD-609 Code e4
Feature Load Discharge, Status Flag
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 8
ECCN Code EAR99
Terminal Finish Nickel/Palladium/Gold (Ni/Pd/Au)
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 1
Supply Voltage 3.3V
Terminal Pitch 0.65mm
Base Part Number TPS2066
Pin Count 8
Number of Outputs 2
Output Type N-Channel
Number of Channels 1
Interface On/Off
Analog IC - Other Type POWER SUPPLY SUPPORT CIRCUIT
Current - Output (Max) 1A
Output Configuration High Side
Voltage - Supply (Vcc/Vdd) Not Required
Adjustable Threshold NO
Input Type Non-Inverting
Switch Type General Purpose
Nominal Input Voltage 5.5V
Threshold Voltage 2.4
Ratio - Input:Output 1:2
Voltage - Load 2.7V~5.5V
Fault Protection Current Limiting (Fixed), Over Temperature, UVLO
Rds On (Typ) 70m Ω
Height 1.1mm
Length 3mm
Width 3mm
Thickness 1.02mm
Radiation Hardening No
RoHS Status ROHS3 Compliant
Lead Free Lead Free

TPS2066DGNR-1 Overview


The LED driver's packaged as a Tape & Reel (TR).In the 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad package, it is included.The mounting type of the LED driver is Surface Mount.General Purpose is the type of switch owned by it.To ensure reliable operation, the temperature should be set to -40°C~125°C TJ.As a default, the output is set to 2.A supply voltage of Not Required is required for it to operate.There is a maximum output voltage of N-Channel volts.In terms of features, the LED driving board has Load Discharge, Status Flag.I believe it belongs to the TPS2066 family.It consists of 8 terminations in total.In order to operate, the 8 pins are used.Currently, there are 1 functions associated with the lighting driver.This LED driver has a maximum output of 1AV.As long as the supply voltage is 3.3V, high efficiency can be achieved.As a result, it is mounted in the manner of Surface Mount.In total, it has 8 pins.The gadget uses an analog IC, which is POWER SUPPLY SUPPORT CIRCUIT in this case.There are a total of 1 available channels.

TPS2066DGNR-1 Features


Supplied from 3.3V
1 channels

TPS2066DGNR-1 Applications


There are a lot of Texas Instruments TPS2066DGNR-1 Power Switches ICs applications.

  • Handheld Devices
  • Hard Disk Drives
  • Solid State Drivers
  • Notebook PC
  • Hot Swap
  • HDD, SSD
  • Portable Music Players
  • Portable GPS
  • Portable Devices
  • Portable/Handheld Devices

Write a review

Note: HTML is not translated!
    Bad           Good