TPS2066TDGNRQ1
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad |
| Number of Pins | 8 |
| Operating Temperature | -40°C~105°C TA |
| Packaging | Tape & Reel (TR) |
| Series | Automotive, AEC-Q100 |
| JESD-609 Code | e4 |
| Feature | Status Flag |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Base Part Number | TPS2066 |
| Pin Count | 8 |
| Number of Outputs | 2 |
| Output Type | N-Channel |
| Max Output Current | 1A |
| Supply Voltage-Max (Vsup) | 5.5V |
| Number of Channels | 1 |
| Interface | On/Off |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Nominal Supply Current | 1A |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Adjustable Threshold | NO |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Supply Current-Max (Isup) | 0.09mA |
| Ratio - Input:Output | 1:2 |
| Voltage - Load | 2.7V~5.5V |
| Fault Protection | Current Limiting (Fixed), Over Temperature, UVLO |
| Rds On (Typ) | 70m Ω |
| Height | 1.1mm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 1.02mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS2066TDGNRQ1 Overview
It is package in Tape & Reel (TR) case.It is included with the 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad package as well.Surface Mount is the mounting type of the LED driver.It owns General Purpose switch type.The temperature should be set to -40°C~105°C TA to ensure reliable functioning.The lighting driver has a total of 2 outputs that are available for use.To operate, it needs a supply voltage of Not Required.It produces a maximum output voltage of N-Channel volts at its maximum output.Status Flag features are available on the lighting driver.It comes under the family of TPS2066.In total, there are 8 terminations.In order to operate, the 8 pins are used.As far as functions are concerned, the lighting driver has 1.To comply with the operation criteria, the maximum output current is reduced to 1A.Supply voltages of 3.3V allow for high efficiency.The lighting driver is mounted in the direction of Surface Mount.8 pins are equipped with it.This electrical component can be found in the Automotive, AEC-Q100 series.This LED driver is configured to have a maximum supply voltage of 5.5V (Vsup).This gadget uses an analog IC, which is POWER SUPPLY SUPPORT CIRCUIT in this case.A total of 1 channels are available for you to choose from.For operation, it has a maximum supply current of 0.09mA.
TPS2066TDGNRQ1 Features
Supplied from 3.3V
1 channels
TPS2066TDGNRQ1 Applications
There are a lot of Texas Instruments TPS2066TDGNRQ1 Power Switches ICs applications.
- Notebook and Tablet Computers
- Hot Swap
- PC Card Hot Swap
- Low Voltage I/O System Power
- Storage Drives
- Notebook PC
- Wireless Headsets
- Hot Swaps
- PC Cards
- Handheld Devices
