TPS2068CDGN
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad |
| Number of Pins | 8 |
| Weight | 24.408939mg |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Feature | Load Discharge, Status Flag |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Resistance | 70mOhm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.65mm |
| Base Part Number | TPS2068 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Voltage | 5.5V |
| Interface | On/Off |
| Analog IC - Other Type | SPST |
| Current | 1.5A |
| Output Configuration | High Side |
| Output Current | 1.5A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Turn On Delay Time | 2.2 ms |
| Switch Type | USB Switch |
| Nominal Input Voltage | 5.5V |
| Turn-Off Delay Time | 2.5 ms |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 4.5V~5.5V |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Reverse Current, UVLO |
| Switching | MAKE-BEFORE-BREAK |
| Rds On (Typ) | 69m Ω |
| Height | 1.1mm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 1.02mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS2068CDGN Overview
It's?packaged?in?the way?of?a?Tube.Package 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad contains it.The lighting driver has the mounting type Surface Mount.The switch type of this switch is USB Switch.To ensure reliable operation, set the temperature to -40°C~125°C TJ.There are 1 outputs available on this lighting driver.A supply voltage of Not Required is required for it to operate.A maximum output voltage of N-Channel volts has been specified.It has a total of Load Discharge, Status Flag features.It comes under the family of TPS2068.In order to operate, the 8 pins are used.Surface Mount is mounted in the way.70mOhm resistance is present in the lighting driver.This results in a 1.5A output current.In this case, the analog IC is SPST.
TPS2068CDGN Features
Resistance of 70mOhm
TPS2068CDGN Applications
There are a lot of Texas Instruments TPS2068CDGN Power Switches ICs applications.
- USB Power Distribution
- Telecom and Network Systems
- Hot Swap
- Hot-Swap Systems
- Portable/Handheld Devices
- Mobile Communication Devices
- Portable GPS
- Storage Drives
- USB Ports/Hubs
- Notebook and Tablet Computers
