TPS2068CDGNR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Cut Tape (CT) |
| JESD-609 Code | e4 |
| Feature | Load Discharge, Status Flag |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| ECCN Code | EAR99 |
| Resistance | 70mOhm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | TPS2068 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Operating Supply Voltage | 5.5V |
| Interface | On/Off |
| Analog IC - Other Type | SPST |
| Output Configuration | High Side |
| Output Current | 1.5A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Max Supply Current | 85μA |
| Input Type | Non-Inverting |
| Turn On Delay Time | 2.2 ms |
| Switch Type | USB Switch |
| Min Input Voltage | 4.5V |
| Max Input Voltage | 5.5V |
| Turn-Off Delay Time | 2.5 ms |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 4.5V~5.5V |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Reverse Current, UVLO |
| Switching | MAKE-BEFORE-BREAK |
| Rds On (Typ) | 69m Ω |
| Height | 1.1mm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 1.02mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS2068CDGNR Overview
The package is in the form of a Cut Tape (CT).It is included with the 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad package as well.The LED driver is mounted as Surface Mount.USB Switch is the switch type that it owns.Keeping the temperature at -40°C~125°C TJ ensures reliable operation.By default, it is set to output 1.In order to operate, it requires a voltage supply of Not Required.A maximum output voltage of N-Channel volts can be achieved by this LED driver.In terms of features, the LED driving board has Load Discharge, Status Flag.It is a member of the TPS2068 family.For operation, 8 pins are used.The lighting driver is mounted in the way of Surface Mount.Currently, the LED driving board has 70mOhm resistance.In this case, the output current will be set to 1.5A.In this case, the analog IC in this gadget is SPST.Optimal efficiency requires a voltage of 5.5V.It has a maximum input voltage of 5.5V volts.A minimum input voltage of 4.5V volts is required for this LED driver.For its operation, a current of 85μA is required.
TPS2068CDGNR Features
Resistance of 70mOhm
TPS2068CDGNR Applications
There are a lot of Texas Instruments TPS2068CDGNR Power Switches ICs applications.
- Solid State Drivers
- Hot Swap
- Storage Drives
- Portable Video Game Players
- Portable GPS Device
- Smart Phones, Feature Phones
- Wearable Devices
- Telecom and Network Systems
- HDD and SSD
- USB Protection
