TPS2068D
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Weight | 72.603129mg |
| Operating Temperature | 0°C~105°C TJ |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Feature | Status Flag |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 8 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Resistance | 70mOhm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | UNDERVOLTAGE LOCKOUT |
| Max Power Dissipation | 585.82mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Base Part Number | TPS2068 |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Output Voltage | 6V |
| Output Type | N-Channel |
| Max Output Current | 1.5A |
| Number of Channels | 1 |
| Interface | On/Off |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Output Configuration | High Side |
| Output Current | 1.5A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Adjustable Threshold | NO |
| Input Type | Non-Inverting |
| Max Output Voltage | 6V |
| Switch Type | General Purpose |
| Min Input Voltage | 2.7V |
| Max Input Voltage | 5.5V |
| Supply Current-Max (Isup) | 0.07mA |
| Nominal Input Voltage | 5.5V |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 2.7V~5.5V |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Reverse Current, UVLO |
| Rds On (Typ) | 70m Ω |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS2068D Overview
The package is in the form of a Tube.In the 8-SOIC (0.154, 3.90mm Width) package, it is included.In this case, the LED driving board is mounted as Surface Mount.It owns the General Purpose switch type.To ensure reliable performance, the temperature should be set to 0°C~105°C TJ.The LED driver has 1 outputs.The LED driving board is powered by a voltage of Not Required.A maximum voltage of N-Channel volts is available from the output of this LED driver.It is equipped with Status Flag features.There is a TPS2068 family of things that it belongs to.A total of 8 terminations have been found in it.In order to operate, the 8 pins are used.As far as functions are concerned, the lighting driver has 1.The maximum output current is reduced to 1.5A to meet the operation criteria.As long as the supply voltage is 3.3V, high efficiency can be achieved.There are 8 pins in total on this board.70mOhm resistance is present in the lighting driver.The output current is set to 1.5A in this case.The gadget uses an analog IC, which is POWER SUPPLY SUPPORT CIRCUIT in this case.The total number of channels is 1.The maximum input voltage is 5.5V volts.The input voltage minimum is 2.7V volts.This LED driver can also produce UNDERVOLTAGE LOCKOUT.Operation requires 0.07mA supply current.
TPS2068D Features
Supplied from 3.3V
Resistance of 70mOhm
1 channels
Additional features like UNDERVOLTAGE LOCKOUT
TPS2068D Applications
There are a lot of Texas Instruments TPS2068D Power Switches ICs applications.
- Portable GPS Device
- Solid-State Drives
- USB Power Distribution
- Set-top-box
- Wearable Devices
- Smart Phones, Feature Phones
- Hot Swaps
- Solid State Drivers
- Low Voltage I/O System Power
- Gaming
