TPS2068DGN
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad |
| Number of Pins | 8 |
| Operating Temperature | -40°C~105°C TJ |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Feature | Status Flag |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Resistance | 70mOhm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | UNDERVOLTAGE LOCKOUT |
| Power Rating | 1.37W |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Base Part Number | TPS2068 |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Number of Channels | 1 |
| Voltage | 5.5V |
| Interface | On/Off |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Nominal Supply Current | 1.5A |
| Current | 1.5A |
| Output Configuration | High Side |
| Power Dissipation | 1.37W |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Adjustable Threshold | NO |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Nominal Input Voltage | 5.5V |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 2.7V~5.5V |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Reverse Current, UVLO |
| Rds On (Typ) | 70m Ω |
| Height | 1.1mm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 1.02mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS2068DGN Overview
As a result, it is packaged in the form of a Tube.Package 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad contains it.The lighting driver has the mounting type Surface Mount.A General Purpose switch type is owned by it.Keeping the temperature at -40°C~105°C TJ ensures reliable operation.It is possible to use 1 outputs in the lighting driver.The LED driving board operates with a supply voltage of Not Required.A maximum output voltage of N-Channel volts can be achieved by this LED driver.A lighting driver with Status Flag features is available.I believe it belongs to the TPS2068 family.There are 8 terminations in it.It is necessary to use the 8 pins in order to operate the LED driver.It is important to note that the LED driving board has 1 functions.Using a voltage of 3.3V allows for high efficiency.As a result, it is mounted in the manner of Surface Mount.8 pins are connected to it in total.In this LED driving board, there is 70mOhm resistance.In this case, the analog IC in this gadget is POWER SUPPLY SUPPORT CIRCUIT.In total, there are 1 channels available.The LED driver can also be used to produce UNDERVOLTAGE LOCKOUT.
TPS2068DGN Features
Supplied from 3.3V
Resistance of 70mOhm
1 channels
Additional features like UNDERVOLTAGE LOCKOUT
TPS2068DGN Applications
There are a lot of Texas Instruments TPS2068DGN Power Switches ICs applications.
- PC Card Hot Swap
- Solid-State Drives
- Low Voltage I/O System Power
- Hot Swap
- Hot Swap
- Solid State Drivers
- Wireless Headsets
- Storage (HDDs, SSDs)
- Hard Disk Drives
- Hot-Swap Systems
