TPS2068DGNR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad |
| Number of Pins | 8 |
| Operating Temperature | -40°C~105°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Feature | Status Flag |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | UNDERVOLTAGE LOCKOUT |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Base Part Number | TPS2068 |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Max Output Current | 1.5A |
| Supply Voltage-Min (Vsup) | 2.7V |
| Number of Channels | 1 |
| Interface | On/Off |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Nominal Supply Current | 1.5A |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Adjustable Threshold | NO |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Supply Current-Max (Isup) | 0.07mA |
| Nominal Input Voltage | 5.5V |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 2.7V~5.5V |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Reverse Current, UVLO |
| Rds On (Typ) | 70m Ω |
| Height | 1.1mm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 1.02mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS2068DGNR Overview
It is packaged in the manner of a Tape & Reel (TR).It's included in the 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad package.This LED driving board is mounted using the mounting type Surface Mount.A General Purpose switch type is owned by it.The temperature should be set to -40°C~105°C TJ to ensure reliable functioning.The LED driver has a total of 1 outputs.In order to operate, it requires a voltage supply of Not Required.Voltage output is N-Channel volts at maximum.It has a total of Status Flag features.It belongs to the family TPS2068.It has a total of 8 terminations.The 8 pins are used for the operation of the system.As far as the lighting driver is concerned, there are 1 functions.Maximum output current falls to 1.5A when operation criteria are met.The supply voltage can be 3.3V for high efficiency.As a result, it is mounted in the manner of Surface Mount.8 pins are equipped with it.In order to operate normally, the supply voltage (Vsup) must be maintained above 2.7V.The analog IC used in this lighting driver is POWER SUPPLY SUPPORT CIRCUIT.You can select from 1 channels.As a result of using this lighting driver, UNDERVOLTAGE LOCKOUT can also be produced.The maximum supply current for the LED driver is 0.07mA when it is operating.
TPS2068DGNR Features
Supplied from 3.3V
1 channels
Additional features like UNDERVOLTAGE LOCKOUT
TPS2068DGNR Applications
There are a lot of Texas Instruments TPS2068DGNR Power Switches ICs applications.
- USB Protection
- Solid-State Drives
- Portable Video Game Players
- Notebook and Tablet Computers
- Smart Phones, Feature Phones
- Portable GPS Device
- Set-top-box
- Notebook PC
- Portable/Handheld Devices
- Storage (HDDs, SSDs)
