TPS2068DGNRG4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad |
| Number of Pins | 8 |
| Operating Temperature | -40°C~105°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Feature | Status Flag |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | UNDERVOLTAGE LOCKOUT |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Base Part Number | TPS2068 |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Max Output Current | 1.5A |
| Supply Voltage-Min (Vsup) | 2.7V |
| Number of Channels | 1 |
| Interface | On/Off |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Adjustable Threshold | NO |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Supply Current-Max (Isup) | 0.07mA |
| Nominal Input Voltage | 5.5V |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 2.7V~5.5V |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Reverse Current, UVLO |
| Rds On (Typ) | 70m Ω |
| Height | 1.1mm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 1.02mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS2068DGNRG4 Overview
As you can see, it's packaged in the way of a Tape & Reel (TR).There is a package for it in the 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad package.This lighting drivere has a mounting type of Surface Mount.There is a switch type of General Purpose.Ensure reliable operation by setting the temperature to -40°C~105°C TJ.It is possible to use 1 outputs in the lighting driver.A voltage of Not Required is used to power it.It produces a maximum output voltage of N-Channel volts at its maximum output.There are Status Flag features available on the LED driving board.I believe it belongs to the TPS2068 family.A total of 8 terminations have been found in it.In order to operate, the 8 pins are used.Currently, the lighting driver has a total of 1 functions.It is necessary to reduce the maximum output current to 1.5A to meet the operation criteria.A supply voltage of 3.3V leads to high efficiency.The lighting driver is mounted in the direction of Surface Mount.This LED driver is equipped with a total of 8 pins.For normal operation, the supply voltage (Vsup) should be kept above 2.7V.The analog IC used in this lighting driver is POWER SUPPLY SUPPORT CIRCUIT.You can select from 1 channels.This LED driver can also produce UNDERVOLTAGE LOCKOUT.Its maximum supply current for operation is 0.07mA.
TPS2068DGNRG4 Features
Supplied from 3.3V
1 channels
Additional features like UNDERVOLTAGE LOCKOUT
TPS2068DGNRG4 Applications
There are a lot of Texas Instruments TPS2068DGNRG4 Power Switches ICs applications.
- Low Voltage I/O System Power
- Set-Top Boxes
- Portable GPS Device
- PC Cards
- HDD, SSD
- Mobile Communication Devices
- Wireless/Networking Cards
- PC Card Hot Swap
- Telecom and Network Systems
- USB Power Distribution
