TPS2068IDGNRQ1
| Parameters | |
|---|---|
| Interface | On/Off |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Nominal Supply Current | 43μA |
| Output Configuration | High Side |
| Output Current | 1.5A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Max Supply Current | 70μA |
| Adjustable Threshold | NO |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Min Input Voltage | 2.7V |
| Max Input Voltage | 5.5V |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 2.7V~5.5V |
| Fault Protection | Current Limiting (Fixed), Over Temperature, UVLO |
| Rds On (Typ) | 70m Ω |
| Height | 1.1mm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 1.02mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad |
| Number of Pins | 8 |
| Operating Temperature | -40°C~105°C TJ |
| Packaging | Tape & Reel (TR) |
| Series | Automotive, AEC-Q100 |
| JESD-609 Code | e4 |
| Feature | Status Flag |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Resistance | 70mOhm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Power Dissipation | 1.37W |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Base Part Number | TPS2068 |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Max Output Current | 1.5A |
| Operating Supply Voltage | 5.5V |
| Number of Channels | 1 |
TPS2068IDGNRQ1 Overview
Tape & Reel (TR) is how it's packaged.It is included with the 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad package as well.In this case, the LED driving board is mounted as Surface Mount.It owns General Purpose switch type.It is recommended that the temperature be set to -40°C~105°C TJ for reliable operation.The lighting driver is equipped with 1 outputs that can be used.A voltage of Not Required is used to power it.It produces a maximum output voltage of N-Channel volts at its maximum output.Status Flag features are available on the lighting driver.The TPS2068 family contains this object.It has a total of 8 terminations.In order to operate, 8 pins are used.It has 1 functions.This operation requires the maximum output current to be decreased to 1.5A.The supply voltage can be 3.3V for high efficiency.This lighting driver is mounted in the way of Surface Mount.A total of 8 pins are present on it.70mOhm resistance is present in the lighting driver.These electrical components are part of the Automotive, AEC-Q100 series.This case has the output current set to 1.5A.The analog IC used in this lighting driver is POWER SUPPLY SUPPORT CIRCUIT.You can select from 1 channels.In order to achieve the best efficiency, the supply voltage should be set to 5.5V.It has a maximum input voltage of 5.5V volts.It requires 2.7V volts as the minimum input voltage.This system has a maximum current requirement of 70μA.
TPS2068IDGNRQ1 Features
Supplied from 3.3V
Resistance of 70mOhm
1 channels
TPS2068IDGNRQ1 Applications
There are a lot of Texas Instruments TPS2068IDGNRQ1 Power Switches ICs applications.
- Telecom and Network Systems
- HDD and SSD
- Handheld Devices
- Portable GPS Device
- PDAs
- Solid-State Drives
- Wireless/Networking Cards
- Notebook and Tablet Computers
- Set-top-box
- Portable/Handheld Devices
