TPS2069CDBVR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 16 hours ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Number of Pins | 5 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Feature | Load Discharge, Status Flag |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Resistance | 76mOhm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | TPS2069 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Max Output Current | 1.5A |
| Operating Supply Voltage | 5.5V |
| Interface | On/Off |
| Analog IC - Other Type | SPST |
| Output Configuration | High Side |
| Output Current | 1.5A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Max Supply Current | 85μA |
| Input Type | Non-Inverting |
| Turn On Delay Time | 2.2 ms |
| Switch Type | USB Switch |
| Min Input Voltage | 4.5V |
| Max Input Voltage | 5.5V |
| Turn-Off Delay Time | 2.5 ms |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 4.5V~5.5V |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Reverse Current, UVLO |
| Switching | MAKE-BEFORE-BREAK |
| Rds On (Typ) | 76m Ω |
| Height | 1.45mm |
| Length | 2.9mm |
| Width | 1.6mm |
| Thickness | 1.2mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS2069CDBVR Overview
As you can see, it's packaged in the way of a Tape & Reel (TR).In the SC-74A, SOT-753 package, it is included.The mounting type of the LED driver is Surface Mount.USB Switch is the type of switch owned by it.To ensure reliable performance, the temperature should be set to -40°C~125°C TJ.The LED driver has 1 outputs.A voltage of Not Required is used to power it.There is a maximum output voltage of N-Channel volts on this LED driver.It is equipped with Load Discharge, Status Flag features.I believe it belongs to the TPS2069 family.The 5 pins are used for the operation of the system.As a result, the maximum output current is reduced to 1.5A in order to meet the operation requirements.Surface Mount is mounted in the way of this lighting driver.The LED driver has 76mOhm resistance.This case results in a 1.5A output current.The gadget uses an analog IC, which is SPST in this case.For maximum efficiency, the supply voltage should be set to 5.5V.This LED driving board can accept voltages up to 5.5V volts as an input.The minimum input voltage is 4.5V volts.A maximum current requirement of 85μA is required for its operation.
TPS2069CDBVR Features
Resistance of 76mOhm
TPS2069CDBVR Applications
There are a lot of Texas Instruments TPS2069CDBVR Power Switches ICs applications.
- Hot Swaps
- Portable GPS Device
- Portable Devices
- USB Power Distribution
- PC Cards
- Handheld Devices
- Notebook and Tablet Computers
- Wireless Modem Data Cards
- Hot Swap
- Solid-State Drives
