TPS2069CDGN-2
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad |
| Number of Pins | 8 |
| Weight | 24.408939mg |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Feature | Status Flag |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Resistance | 70mOhm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.65mm |
| Base Part Number | TPS2069 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Voltage | 5.5V |
| Interface | On/Off |
| Analog IC - Other Type | SPST |
| Current | 1.5A |
| Output Configuration | High Side |
| Output Current | 1.5A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Turn On Delay Time | 2.2 ms |
| Switch Type | USB Switch |
| Nominal Input Voltage | 5.5V |
| Turn-Off Delay Time | 2.5 ms |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 4.5V~5.5V |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Reverse Current, UVLO |
| Switching | MAKE-BEFORE-BREAK |
| Rds On (Typ) | 69m Ω |
| Height | 1.1mm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 1.02mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS2069CDGN-2 Overview
A Tube is used to package it.Package 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad contains it.The mounting type of the LED driver is Surface Mount.There is a USB Switch switch type associated with it.It is recommended that the temperature be set to -40°C~125°C TJ for reliable performance.There is a default setting of 1 for output.The LED driving board is powered by a voltage of Not Required.A maximum output voltage of N-Channel volts can be achieved by this LED driver.Features of the lighting driver are Status Flag.The TPS2069 family consists of this type.In order to operate, the 8 pins are used.In this case, it is mounted in the way of Surface Mount.Currently, the LED driving board has 70mOhm resistance.It is set to 1.5A in this case.In this case, the analog IC is SPST.
TPS2069CDGN-2 Features
Resistance of 70mOhm
TPS2069CDGN-2 Applications
There are a lot of Texas Instruments TPS2069CDGN-2 Power Switches ICs applications.
- Notebook and Tablet Computers
- Hard Disk Drives
- Telecom and Network Systems
- Storage (HDDs, SSDs)
- Storage Drives
- Hot-Swap Systems
- Portable Music Players
- Various applications equipped with buttons
- USB3.1 Power Delivery
- USB Power Distribution
