TPS2069CDGN
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Feature | Load Discharge, Status Flag |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 8 |
| Resistance | 76mOhm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Base Part Number | TPS2069 |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Number of Channels | 1 |
| Voltage | 5.5V |
| Interface | On/Off |
| Analog IC - Other Type | ANALOG CIRCUIT |
| Nominal Supply Current | 2.15A |
| Current | 1.5A |
| Output Configuration | High Side |
| Output Current | 1.5A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | USB Switch |
| Min Input Voltage | 4.5V |
| Max Input Voltage | 5.5V |
| Nominal Input Voltage | 5.5V |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 4.5V~5.5V |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Reverse Current, UVLO |
| Rds On (Typ) | 69m Ω |
| Height | 1.1mm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 1.02mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS2069CDGN Overview
The package is in the form of a Tube.The 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad package includes it.The LED driver is mounted as Surface Mount.A USB Switch switch type is owned by it.To ensure reliable performance, the temperature should be set to -40°C~125°C TJ.The lighting driver is equipped with 1 outputs that can be used.Operation is based on Not Required supply voltage.A maximum output voltage of N-Channel volts can be obtained with this LED driver.Currently, the LED driving board is equipped with Load Discharge, Status Flag features.There is a TPS2069 family of things that it belongs to.It consists of 8 terminations in total.The 8 pins are used for the operation of the system.There are 1 functions of the LED driver.High efficiency is possible when the supply voltage is set to 5V.As a result, it has a total of 8 pins.Currently, the LED driving board has 76mOhm resistance.When this is the case, the output current is set to 1.5A.There is an analog input IC in this gadget, which is ANALOG CIRCUIT.We currently have 1 channels available.There is a maximum input voltage of 5.5V volts.It has a 4.5V volt minimum input voltage.
TPS2069CDGN Features
Supplied from 5V
Resistance of 76mOhm
1 channels
TPS2069CDGN Applications
There are a lot of Texas Instruments TPS2069CDGN Power Switches ICs applications.
- Gaming
- Storage (HDDs, SSDs)
- Set-top-box
- Set-Top Boxes
- Wearable Devices
- Mobile Communication Devices
- PDAs
- HDD, SSD
- Various applications equipped with buttons
- Hot Swap
