TPS2069CDGNR-2

N-Channel 0.65mm PMIC TPS2069 8 Pin 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad

Manufacturer: Texas Instruments
Nocochips NO: 815-TPS2069CDGNR-2
Package: 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad
Datasheet: -
Stock: 927
Description: N-Channel 0.65mm PMIC TPS2069 8 Pin 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad (Kg)

Details

Tags

Parameters
Factory Lead Time	1 Week
Lifecycle Status	ACTIVE (Last Updated: 3 days ago)
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad
Number of Pins	8
Operating Temperature	-40°C~125°C TJ
Packaging	Tape & Reel (TR)
JESD-609 Code	e4
Feature	Status Flag
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	2 (1 Year)
ECCN Code	EAR99
Resistance	70mOhm
Terminal Finish	Nickel/Palladium/Gold (Ni/Pd/Au)
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Terminal Pitch	0.65mm
Time@Peak Reflow Temperature-Max (s)	NOT SPECIFIED
Base Part Number	TPS2069
Number of Outputs	1
Output Type	N-Channel
Max Output Current	1.5A
Operating Supply Voltage	5.5V
Interface	On/Off
Analog IC - Other Type	SPST
Output Configuration	High Side
Output Current	1.5A
Voltage - Supply (Vcc/Vdd)	Not Required
Max Supply Current	85μA
Input Type	Non-Inverting
Turn On Delay Time	2.2 ms
Switch Type	USB Switch
Min Input Voltage	4.5V
Max Input Voltage	5.5V
Turn-Off Delay Time	2.5 ms
Ratio - Input:Output	1:1
Voltage - Load	4.5V~5.5V
Fault Protection	Current Limiting (Fixed), Over Temperature, Reverse Current, UVLO
Switching	MAKE-BEFORE-BREAK
Rds On (Typ)	69m Ω
Height	1.1mm
Length	3mm
Width	3mm
Thickness	1.02mm
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

TPS2069CDGNR-2 Overview

Tape & Reel (TR) is the way it's packaged.This package is included in 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad.Mounting type Surface Mount is selected for the LED driving board.This switch is of type USB Switch.Keeping the temperature at -40°C~125°C TJ ensures reliable operation.The lighting driver is equipped with 1 outputs that can be used.To operate, it needs a supply voltage of Not Required.There is a maximum output voltage of N-Channel volts.There are Status Flag features available on the LED driving board.This object belongs to the TPS2069 family.During operation, the 8 pins are used.The maximum output current is reduced to 1.5A to meet the operation criteria.It is positioned in the direction of Surface Mount.Currently, the LED driving board has a resistance of 70mOhm ohms.The output current is set to 1.5A in this case.In this case, the analog IC is SPST.In order to maximize efficiency, the supply voltage should be set to 5.5V.Input voltage is limited to 5.5V volts.It has a 4.5V volt minimum input voltage.This system has a maximum current requirement of 85μA.