TPS2069CDGNR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Cut Tape (CT) |
| JESD-609 Code | e4 |
| Feature | Load Discharge, Status Flag |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Resistance | 76mOhm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Base Part Number | TPS2069 |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Number of Channels | 1 |
| Interface | On/Off |
| Analog IC - Other Type | ANALOG CIRCUIT |
| Nominal Supply Current | 2.15A |
| Output Configuration | High Side |
| Output Current | 1.5A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | USB Switch |
| Min Input Voltage | 4.5V |
| Max Input Voltage | 5.5V |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 4.5V~5.5V |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Reverse Current, UVLO |
| Rds On (Typ) | 69m Ω |
| Height | 1.1mm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 1.02mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS2069CDGNR Overview
It is package in Cut Tape (CT) case.There is a 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad package that includes it.It has been mounted as Surface Mount on the LED driver.It owns the USB Switch switch type.It is best to set the temperature to -40°C~125°C TJ to ensure reliable operation.There are 1 outputs available on this lighting driver.In order to operate, it requires a voltage supply of Not Required.A maximum output voltage of N-Channel volts has been specified.It is equipped with Load Discharge, Status Flag features.As you can see, it comes from the TPS2069 family.A total of 8 terminations can be found in it.In order to operate, 8 pins are used.It is important to note that the LED driving board has 1 functions.It is possible to obtain high efficiency with a supply voltage of 5V.This LED driver is equipped with a total of 8 pins.76mOhm is the resistance of the lighting driver.When this is the case, the output current is set to 1.5A.In this LED driving board, the analog IC ANALOG CIRCUIT is employed.A total of 1 channels are available for you to choose from.A maximum input voltage of 5.5V volts can be applied to it.As a minimum input voltage, it requires 4.5V volts.
TPS2069CDGNR Features
Supplied from 5V
Resistance of 76mOhm
1 channels
TPS2069CDGNR Applications
There are a lot of Texas Instruments TPS2069CDGNR Power Switches ICs applications.
- Low Voltage I/O System Power
- Solid-State Drives
- Solid State Drivers
- USB3.1 Power Delivery
- PDAs
- HDD and SSD
- Portable/Handheld Devices
- Gaming
- Notebook PC
- HDD, SSD
