TPS2069DGN
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad |
| Number of Pins | 8 |
| Operating Temperature | -40°C~105°C TJ |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Feature | Status Flag |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Resistance | 125mOhm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | UNDERVOLTAGE LOCKOUT |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Base Part Number | TPS2069 |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Output Voltage | 6V |
| Output Type | N-Channel |
| Supply Voltage-Min (Vsup) | 2.7V |
| Number of Channels | 1 |
| Interface | On/Off |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Nominal Supply Current | 1.5A |
| Output Configuration | High Side |
| Output Current | 1.5A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Adjustable Threshold | NO |
| Input Type | Non-Inverting |
| Turn On Delay Time | 3 ms |
| Switch Type | General Purpose |
| Supply Current-Max (Isup) | 0.07mA |
| Nominal Input Voltage | 5.5V |
| Turn-Off Delay Time | 10 ms |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 2.7V~5.5V |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Reverse Current, UVLO |
| Rds On (Typ) | 70m Ω |
| Height | 1.1mm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 1.02mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS2069DGN Overview
It is package in Tube case.It is included with the 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad package as well.In this case, the LED driving board is mounted as Surface Mount.It owns the General Purpose switch type.To ensure reliable performance, the temperature should be set to -40°C~105°C TJ.As a default, the output is set to 1.A voltage of Not Required is used to power it.It has a maximum output voltage of N-Channel volts.Currently, the LED driving board is equipped with Status Flag features.The TPS2069 family consists of this type.The termination count is 8.The operation is performed through the 8 pins.Currently, the lighting driver has a total of 1 functions.A supply voltage of 3.3V leads to high efficiency.The lighting driver is mounted in the direction of Surface Mount.As a result, it has a total of 8 pins.It has 125mOhm resistance.When this case is used, the output current is set to 1.5A.The supply voltage (Vsup) should be kept above 2.7V for normal operation.In this case, a digital IC is used, which is POWER SUPPLY SUPPORT CIRCUIT.You can select from 1 channels.Through the use of this lighting driver, we can also produce UNDERVOLTAGE LOCKOUT.It operates at a maximum supply current of 0.07mA.
TPS2069DGN Features
Supplied from 3.3V
Resistance of 125mOhm
1 channels
Additional features like UNDERVOLTAGE LOCKOUT
TPS2069DGN Applications
There are a lot of Texas Instruments TPS2069DGN Power Switches ICs applications.
- Hot Swap
- Hot Swaps
- Solid State Drivers
- Handheld Devices
- Gaming
- Wireless Headsets
- Various applications equipped with buttons
- HDD and SSD
- Portable/Handheld Devices
- USB Power Distribution
