Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 1 week ago) |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad |
Number of Pins |
8 |
Operating Temperature |
-40°C~105°C TJ |
Packaging |
Tube |
JESD-609 Code |
e4 |
Feature |
Status Flag |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
8 |
ECCN Code |
EAR99 |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Additional Feature |
UNDERVOLTAGE LOCKOUT |
Max Power Dissipation |
1.37W |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
3.3V |
Terminal Pitch |
0.65mm |
Base Part Number |
TPS2069 |
Pin Count |
8 |
Number of Outputs |
1 |
Output Type |
N-Channel |
Number of Channels |
1 |
Interface |
On/Off |
Analog IC - Other Type |
POWER SUPPLY SUPPORT CIRCUIT |
Current - Output (Max) |
1.5A |
Output Configuration |
High Side |
Voltage - Supply (Vcc/Vdd) |
Not Required |
Adjustable Threshold |
NO |
Input Type |
Non-Inverting |
Switch Type |
General Purpose |
Min Input Voltage |
2.7V |
Max Input Voltage |
5.5V |
Supply Current-Max (Isup) |
0.07mA |
Nominal Input Voltage |
5.5V |
Ratio - Input:Output |
1:1 |
Voltage - Load |
2.7V~5.5V |
Fault Protection |
Current Limiting (Fixed), Over Temperature, Reverse Current, UVLO |
Rds On (Typ) |
70m Ω |
Height |
1.1mm |
Length |
3mm |
Width |
3mm |
Thickness |
1.02mm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
TPS2069DGNG4 Overview
The package is in the form of a Tube.Package 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad contains it.The mounting type of the LED driver is Surface Mount.There is a switch type of General Purpose.Keeping the temperature at -40°C~105°C TJ ensures reliable operation.The LED driver is equipped with 1 outputs.A supply voltage of Not Required is required for it to operate.It has a maximum output voltage of N-Channel volts.Features of the lighting driver are Status Flag.As you can see, it comes from the TPS2069 family.The termination count is 8.The 8 pins are used to operate the LED driver.As far as functions are concerned, the lighting driver has 1.This lighting driver is capable of delivering a maximum output of 1.5A volts.It is possible to achieve a high level of efficiency with a supply voltage of 3.3V.Surface Mount is mounted in the way.8 pins are connected to it in total.In this case, a digital IC is used, which is POWER SUPPLY SUPPORT CIRCUIT.We offer 1 channels in total.This LED driving board can accept voltages up to 5.5V volts as an input.It has a 2.7V volt minimum input voltage.In addition, UNDERVOLTAGE LOCKOUT can be produced using this LED driving board.In order to operate, it requires at most 0.07mA amps of supply current.
TPS2069DGNG4 Features
Supplied from 3.3V
1 channels
Additional features like UNDERVOLTAGE LOCKOUT
TPS2069DGNG4 Applications
There are a lot of Texas Instruments TPS2069DGNG4 Power Switches ICs applications.
- USB Power Distribution
- Low Voltage I/O System Power
- PC Card Hot Swap
- USB3.1 Power Delivery
- Portable Music Players
- Portable GPS
- Smartphone and PDA
- Mobile Communication Devices
- HDD, SSD
- USB Power Distribution