Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 1 week ago) |
Mounting Type |
Surface Mount |
Package / Case |
24-SSOP (0.209, 5.30mm Width) |
Surface Mount |
YES |
Number of Pins |
24 |
Weight |
172.39345mg |
Operating Temperature |
-40°C~125°C TJ |
Packaging |
Tube |
JESD-609 Code |
e4 |
Feature |
Power Good, Status Flag |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
24 |
Termination |
SMD/SMT |
ECCN Code |
EAR99 |
Resistance |
500mOhm |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Subcategory |
Power Management Circuits |
Max Power Dissipation |
889.7mW |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
5V |
Terminal Pitch |
0.65mm |
Base Part Number |
TPS2074 |
Pin Count |
24 |
Number of Outputs |
4 |
Output Voltage |
2.4V |
Output Type |
N-Channel |
Max Output Current |
100mA |
Power Supplies |
5V |
Number of Channels |
4 |
Interface |
On/Off |
Analog IC - Other Type |
POWER SUPPLY SUPPORT CIRCUIT |
Output Configuration |
High Side |
Output Current |
500mA |
Voltage - Supply (Vcc/Vdd) |
Not Required |
Adjustable Threshold |
NO |
Switch Type |
USB Switch |
Min Input Voltage |
4.5V |
Max Input Voltage |
5.5V |
Supply Current-Max (Isup) |
0.36mA |
Nominal Input Voltage |
5.5V |
Threshold Voltage |
2.94 |
Ratio - Input:Output |
1:4 |
Voltage - Load |
4.5V~5.5V |
Min Current Limit |
120mA |
Fault Protection |
Over Temperature |
Rds On (Typ) |
100m Ω |
Height |
2mm |
Length |
8.2mm |
Width |
5.3mm |
Thickness |
1.95mm |
Radiation Hardening |
No |
REACH SVHC |
No SVHC |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
TPS2074DB Overview
It's?packaged?in?the way?of?a?Tube.There is a package for it in the 24-SSOP (0.209, 5.30mm Width) package.Surface Mount is the mounting type of the LED driver.There is a USB Switch switch type associated with it.It is recommended that the temperature be set to -40°C~125°C TJ for reliable performance.In this LED driver, there are no outputs available.The LED driving board operates at Not Required volts.The maximum output voltage is N-Channel volts.Power Good, Status Flag features are available on the lighting driver.It belongs to the TPS2074 family.It has a total of 24 terminations.In order to operate, 24 pins are used.It contains 1 functions.This operation requires the maximum output current to be decreased to 100mA.Using a voltage of 5V allows for high efficiency.A total of 24 pins are present on it.It has a resistance of 500mOhm.In this case, the output current will be set to 500mA.A self-contained econtainer holding Power Management Circuits capacity contains this lighting driver.The analog IC used in this lighting driver is POWER SUPPLY SUPPORT CIRCUIT.The total number of channels is 4.It has a power supply of 5V.A maximum input voltage of 5.5V volts can be applied to it.As a minimum input voltage, it requires 4.5V volts.It has a maximum supply current of 0.36mA.
TPS2074DB Features
Supplied from 5V
Resistance of 500mOhm
4 channels
TPS2074DB Applications
There are a lot of Texas Instruments TPS2074DB Power Switches ICs applications.
- Storage (HDDs, SSDs)
- Portable GPS
- Wireless/Networking Cards
- Portable/Handheld Devices
- Hard Disk Drives
- HDD and SSD
- Wearable Devices
- Hot-Swap Systems
- Set-Top Boxes
- Solid-State Drives