banner_page

TPS2075DB

5V N-Channel 0.65mm PMIC TPS2075 24 Pin 5V 24-SSOP (0.209, 5.30mm Width)


  • Manufacturer: Texas Instruments
  • Nocochips NO: 815-TPS2075DB
  • Package: 24-SSOP (0.209, 5.30mm Width)
  • Datasheet: -
  • Stock: 239
  • Description: 5V N-Channel 0.65mm PMIC TPS2075 24 Pin 5V 24-SSOP (0.209, 5.30mm Width) (Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Lifecycle Status ACTIVE (Last Updated: 1 week ago)
Mounting Type Surface Mount
Package / Case 24-SSOP (0.209, 5.30mm Width)
Surface Mount YES
Number of Pins 24
Weight 172.39345mg
Operating Temperature -40°C~125°C TJ
Packaging Tube
JESD-609 Code e4
Feature Power Good, Status Flag
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 24
ECCN Code EAR99
Resistance 500mOhm
Terminal Finish Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory Power Management Circuits
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 1
Supply Voltage 5V
Terminal Pitch 0.65mm
Base Part Number TPS2075
Pin Count 24
Number of Outputs 4
Output Type N-Channel
Max Output Current 100mA
Power Supplies 5V
Number of Channels 4
Interface On/Off
Analog IC - Other Type POWER SUPPLY SUPPORT CIRCUIT
Output Configuration High Side
Voltage - Supply (Vcc/Vdd) Not Required
Adjustable Threshold NO
Switch Type USB Switch
Min Input Voltage 4.5V
Data Rate 480 Mbps
Max Input Voltage 5.5V
Supply Current-Max (Isup) 0.36mA
Nominal Input Voltage 5.5V
Threshold Voltage 2.94
Ratio - Input:Output 1:4
Voltage - Load 4.5V~5.5V
Min Current Limit 120mA
Fault Protection Over Temperature
Rds On (Typ) 100m Ω
Height 2mm
Length 8.2mm
Width 5.3mm
Thickness 1.95mm
Radiation Hardening No
REACH SVHC No SVHC
RoHS Status ROHS3 Compliant
Lead Free Lead Free

TPS2075DB Overview


It is package in Tube case.This package is included in 24-SSOP (0.209, 5.30mm Width).The lighting driver has the mounting type Surface Mount.It owns USB Switch switch type.In order to guarantee reliable performance, the temperature should be set to -40°C~125°C TJ.It is possible to use 4 outputs in the lighting driver.To operate, it needs a supply voltage of Not Required.There is a maximum output voltage of N-Channel volts on this LED driver.This LED driving board is equipped with Power Good, Status Flag features in order for it to be useful.The TPS2075 family consists of this type.It contains 24 terminations.The operation is performed through the 24 pins.There are 1 functions of the LED driver.This operation requires the maximum output current to be decreased to 100mA.A supply voltage of 5V leads to high efficiency.The LED driver has a total of 24 pins.500mOhm resistance is present in the lighting driver.This LED driver is self-contained in an econtainer with a capacity of Power Management Circuits.It uses an analog IC, which is POWER SUPPLY SUPPORT CIRCUIT.In total, there are 4 channels available.In this case, the power supply is 5V.The maximum input voltage is 5.5V volts.The minimum input voltage is 4.5V volts.It has a maximum supply current of 0.36mA.

TPS2075DB Features


Supplied from 5V
Resistance of 500mOhm
4 channels

TPS2075DB Applications


There are a lot of Texas Instruments TPS2075DB Power Switches ICs applications.

  • USB Power Distribution
  • Portable GPS
  • HDD and SSD
  • Telecom and Network Systems
  • Mobile Communication Devices
  • Smartphone and PDA
  • USB3.1 Power Delivery
  • Low Voltage I/O System Power
  • Notebook and Tablet Computers
  • Hot-Swap Systems

Write a review

Note: HTML is not translated!
    Bad           Good