TPS2075DBR
| Parameters | |
|---|---|
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Resistance | 500mOhm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Power Management Circuits |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Base Part Number | TPS2075 |
| Pin Count | 24 |
| Number of Outputs | 4 |
| Output Type | N-Channel |
| Power Supplies | 5V |
| Number of Channels | 4 |
| Interface | On/Off |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Current - Output (Max) | 100mA |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Adjustable Threshold | NO |
| Switch Type | USB Switch |
| Min Input Voltage | 4.5V |
| Max Input Voltage | 5.5V |
| Supply Current-Max (Isup) | 0.36mA |
| Nominal Input Voltage | 5.5V |
| Threshold Voltage | 2.94 |
| Ratio - Input:Output | 1:4 |
| Voltage - Load | 4.5V~5.5V |
| Min Current Limit | 120mA |
| Fault Protection | Over Temperature |
| Rds On (Typ) | 100m Ω |
| Height | 2mm |
| Length | 8.2mm |
| Width | 5.3mm |
| Thickness | 1.95mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 24-SSOP (0.209, 5.30mm Width) |
| Surface Mount | YES |
| Number of Pins | 24 |
| Weight | 172.39345mg |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Feature | Power Good, Status Flag |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
TPS2075DBR Overview
Tape & Reel (TR) is how it's packaged.The 24-SSOP (0.209, 5.30mm Width) package includes it.A Surface Mount mounting is used for the LED driving board.There is a switch type of USB Switch.The temperature should be set to -40°C~125°C TJ to ensure reliable functioning.By default, it is set to output 4.In order to operate, it requires a voltage supply of Not Required.A maximum output voltage of N-Channel volts can be obtained with this LED driver.There are Power Good, Status Flag features available on the LED driving board.It belongs to the TPS2075 family.As a result, there are 24 terminations.The operation is performed through the 24 pins.Currently, there are 1 functions associated with the lighting driver.There is a maximum output of 100mAV from the LED driver.A supply voltage of 5V leads to high efficiency.The LED driver has a total of 24 pins.The LED driver has 500mOhm resistance.It is self-contained in an econtainer with a capacity of Power Management Circuits.In this case, the analog IC is POWER SUPPLY SUPPORT CIRCUIT.In total, 4 channels are available.A 5V power supply is used by the part.The maximum input voltage of the LED driver is 5.5V volts.The input voltage minimum is 4.5V volts.In order to operate, it requires at most 0.36mA amps of supply current.
TPS2075DBR Features
Supplied from 5V
Resistance of 500mOhm
4 channels
TPS2075DBR Applications
There are a lot of Texas Instruments TPS2075DBR Power Switches ICs applications.
- USB3.1 Power Delivery
- HDD and SSD
- Set-top-box
- Notebook PC
- Smartphone and PDA
- Hot Swaps
- Wireless Headsets
- Portable GPS
- USB Protection
- Hot-Swap Systems
