TPS2080D
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Contact Plating | Gold |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Weight | 75.891673mg |
| Operating Temperature | 0°C~125°C TJ |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Feature | Status Flag |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Resistance | 80mOhm |
| Subcategory | Peripheral Drivers |
| Max Power Dissipation | 725mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 3.3V |
| Base Part Number | TPS2080 |
| Pin Count | 8 |
| Output Type | N-Channel |
| Max Output Current | 500mA |
| Operating Supply Voltage | 5.5V |
| Power Supplies | 3/5V |
| Interface | On/Off |
| Nominal Supply Current | 85μA |
| Output Configuration | High Side |
| Power Dissipation | 725mW |
| Output Current | 500mA |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Max Supply Current | 85μA |
| Quiescent Current | 85μA |
| Input Type | Non-Inverting |
| Turn On Delay Time | 20 ms |
| Switch Type | General Purpose |
| Min Input Voltage | 2.7V |
| Number of Inputs | 2 |
| Max Input Voltage | 5.5V |
| Nominal Input Voltage | 5.5V |
| Turn-Off Delay Time | 40 ms |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 2.7V~5.5V |
| Driver Number of Bits | 2 |
| Min Current Limit | 700mA |
| Fault Protection | Current Limiting (Fixed), Over Temperature, UVLO |
| Output Peak Current Limit-Nom | 1A |
| Rds On (Typ) | 80m Ω |
| Turn Off Time | 40000 µs |
| Built-in Protections | TRANSIENT; OVER CURRENT; THERMAL; UNDER VOLTAGE |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS2080D Overview
A Tube is used to package it.The 8-SOIC (0.154, 3.90mm Width) package contains it.The lighting driver has the mounting type Surface Mount.This switch is of type General Purpose.In order to guarantee reliable performance, the temperature should be set to 0°C~125°C TJ.The LED driving board is powered by a voltage of Not Required.It has a maximum output voltage of N-Channel volts.It has a total of Status Flag features.It belongs to the TPS2080 family.A total of 8 terminations have been found in it.The 8 pins are used for the operation of the system.The LED driving board has a total of 2 functions.The maximum output current must drop to 500mA to meet the operation criteria.As long as the supply voltage is 3.3V, high efficiency can be achieved.There are 8 pins in total on this board.The LED driver has 80mOhm resistance.This results in a 500mA output current.This LED driver is self-contained in an econtainer with a capacity of Peripheral Drivers.This part has a power supply of 3/5V.It is recommended that the supply voltage be set at 5.5V in order to achieve maximum efficiency.Its maximum input voltage is 5.5V volts.As a minimum input voltage, it requires 2.7V volts.It requires 85μA current to operate.There are 2 inputs available.
TPS2080D Features
Supplied from 3.3V
Resistance of 80mOhm
TPS2080D Applications
There are a lot of Texas Instruments TPS2080D Power Switches ICs applications.
- Set-Top Boxes
- Wireless Modem Data Cards
- Hot Swaps
- Storage (HDDs, SSDs)
- USB3.1 Power Delivery
- Notebook and Tablet Computers
- Portable Music Players
- Solid-State Drives
- USB Power Distribution
- Storage Drives
