TPS2080DR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Contact Plating | Gold |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Weight | 75.891673mg |
| Operating Temperature | 0°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Feature | Status Flag |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Resistance | 80mOhm |
| Subcategory | Peripheral Drivers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 3.3V |
| Base Part Number | TPS2080 |
| Pin Count | 8 |
| Output Type | N-Channel |
| Max Output Current | 500mA |
| Operating Supply Voltage | 5.5V |
| Power Supplies | 3/5V |
| Interface | On/Off |
| Nominal Supply Current | 85μA |
| Output Configuration | High Side |
| Output Current | 500mA |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Max Supply Current | 85μA |
| Quiescent Current | 85μA |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Min Input Voltage | 2.7V |
| Number of Inputs | 2 |
| Max Input Voltage | 5.5V |
| Nominal Input Voltage | 5.5V |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 2.7V~5.5V |
| Driver Number of Bits | 2 |
| Min Current Limit | 700mA |
| Fault Protection | Current Limiting (Fixed), Over Temperature, UVLO |
| Output Peak Current Limit-Nom | 1A |
| Rds On (Typ) | 80m Ω |
| Turn Off Time | 40000 µs |
| Built-in Protections | TRANSIENT; OVER CURRENT; THERMAL; UNDER VOLTAGE |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS2080DR Overview
As a result, it is packaged in the form of a Tape & Reel (TR).Package 8-SOIC (0.154, 3.90mm Width) contains it.A Surface Mount mounting is used for the LED driving board.It owns General Purpose switch type.It is best to set the temperature to 0°C~125°C TJ to ensure reliable operation.In order to operate, it requires a voltage supply of Not Required.The maximum output voltage is N-Channel volts.In terms of features, the LED driving board has Status Flag.This object belongs to the TPS2080 family.It contains 8 terminations.The operation is performed through the 8 pins.Currently, there are 2 functions associated with the lighting driver.Maximum output current falls to 500mA when operation criteria are met.A supply voltage of 3.3V leads to high efficiency.In total, it has 8 pins.Currently, the LED driving board has a resistance of 80mOhm ohms.It is set to 500mA in this case.The LED driver is self-contained in an econtainer with Peripheral Drivers capacity.The power supply of the part is 3/5V.It is recommended to set the supply voltage to 5.5V for optimum efficiency.A maximum input voltage of 5.5V volts can be applied to it.There is a minimum input voltage of 2.7V volts.For its operation, a current of 85μA is required.With 2 inputs, it is equipped.
TPS2080DR Features
Supplied from 3.3V
Resistance of 80mOhm
TPS2080DR Applications
There are a lot of Texas Instruments TPS2080DR Power Switches ICs applications.
- Various applications equipped with buttons
- PC Card Hot Swap
- Notebook PC
- Wireless/Networking Cards
- HDD, SSD
- HDD and SSD
- Notebook and Tablet Computers
- Set-top-box
- Portable GPS Device
- Smartphone and PDA
