TPS2081D
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Weight | 75.891673mg |
| Operating Temperature | 0°C~125°C TJ |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Feature | Status Flag |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Resistance | 80mOhm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Peripheral Drivers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 3.3V |
| Base Part Number | TPS2081 |
| Pin Count | 8 |
| Output Type | N-Channel |
| Max Output Current | 500mA |
| Operating Supply Voltage | 5.5V |
| Power Supplies | 3/5V |
| Interface | On/Off |
| Nominal Supply Current | 85μA |
| Output Configuration | High Side |
| Power Dissipation | 725mW |
| Output Current | 500mA |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Max Supply Current | 85μA |
| Quiescent Current | 85μA |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Min Input Voltage | 2.7V |
| Number of Inputs | 2 |
| Max Input Voltage | 5.5V |
| Nominal Input Voltage | 5.5V |
| Ratio - Input:Output | 1:1 |
| Input Characteristics | STANDARD |
| Voltage - Load | 2.7V~5.5V |
| Driver Number of Bits | 2 |
| Min Current Limit | 700mA |
| Fault Protection | Current Limiting (Fixed), Over Temperature, UVLO |
| Output Peak Current Limit-Nom | 1A |
| Rds On (Typ) | 80m Ω |
| Turn Off Time | 40000 µs |
| Built-in Protections | TRANSIENT; OVER CURRENT; THERMAL; UNDER VOLTAGE |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS2081D Overview
As you can see, it's packaged in the way of a Tube.The 8-SOIC (0.154, 3.90mm Width) package contains it.The lighting driver has the mounting type Surface Mount.The switch type of this switch is General Purpose.It is recommended that the temperature be set to 0°C~125°C TJ for reliable operation.The LED driving board operates with a supply voltage of Not Required.A maximum output voltage of N-Channel volts can be achieved by this LED driver.It is equipped with Status Flag features.There is a TPS2081 family of things that it belongs to.It consists of 8 terminations in total.For operation, we use the 8 pins.As far as the lighting driver is concerned, there are 2 functions.To comply with the operation criteria, the maximum output current is reduced to 500mA.As long as the supply voltage is 3.3V, high efficiency can be achieved.As a result, it has a total of 8 pins.The LED driver has 80mOhm resistance.The output current is set to 500mA in this case.It is self-contained in an econtainer with a capacity of Peripheral Drivers.This part's power supply is 3/5V.In order to optimize the efficiency of the supply voltage, it should be set to 5.5V.As far as input voltage goes, its maximum is 5.5V volts.There is a minimum input voltage of 2.7V volts for this LED driver.The maximum current required for its operation is 85μA.Currently, there are 2 inputs available.
TPS2081D Features
Supplied from 3.3V
Resistance of 80mOhm
TPS2081D Applications
There are a lot of Texas Instruments TPS2081D Power Switches ICs applications.
- Hot-Swap Systems
- Handheld Devices
- Hot Swaps
- Wireless Headsets
- PC Cards
- USB Power Distribution
- Notebook and Tablet Computers
- Smartphone and PDA
- Wireless/Networking Cards
- Storage Drives
