TPS2082DG4
| Parameters | |
|---|---|
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 3.3V |
| Pin Count | 8 |
| Number of Outputs | 2 |
| Max Output Current | 500mA |
| Operating Supply Voltage | 5.5V |
| Power Supplies | 3/5V |
| Temperature Grade | COMMERCIAL EXTENDED |
| Nominal Supply Current | 85μA |
| Max Supply Current | 85μA |
| Current - Output | 500mA |
| Quiescent Current | 85μA |
| Min Input Voltage | 2.7V |
| Max Input Voltage | 5.5V |
| Nominal Input Voltage | 5.5V |
| Interface IC Type | BUFFER OR INVERTER BASED PERIPHERAL DRIVER |
| Driver Number of Bits | 2 |
| Min Current Limit | 700mA |
| Output Peak Current Limit-Nom | 1A |
| Turn Off Time | 40000 µs |
| Built-in Protections | TRANSIENT; OVER CURRENT; THERMAL; UNDER VOLTAGE |
| Output Current Flow Direction | SINK |
| Height | 1.58mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
| Package / Case | SOIC |
| Surface Mount | YES |
| Number of Pins | 8 |
| Weight | 75.891673mg |
| JESD-609 Code | e4 |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Resistance | 80mOhm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | 0°C |
| Subcategory | Peripheral Drivers |
| Technology | CMOS |
| Terminal Position | DUAL |
TPS2082DG4 Overview
As part of the SOIC package, it is included.8 terminations are present in total.A device's terminal position is DUAL.There are a total of 8 pins on it.High efficiency can be achieved with a voltage supply of 3.3V.Operating the device requires 8 pins.Peripheral Drivers contains this gadget on its own.Operating at 85°C°C ensures stable performance.Hot-swappable device operates at a minimum temperature of 0°C degrees Celsius in order to ensure reliabilHot-swappable devicey.The power supplies of the part is 3/5V.Hot Swap is set to output 2 by default.Hot Swap is necessary to reduce the maximum output current to 500mA in order to meet the operation crHot Swaperia.Its maximum current requirement is 85μA.Resistance to 80mOhm is present in the device.
TPS2082DG4 Features
The terminal position of 8
TPS2082DG4 Applications
There are a lot of Texas Instruments TPS2082DG4 hot swap controllers applications.
- Circuit power protectors
- Short-circuit protection in real time
- Hard drive
- Industrial application
- Circuit breakers for electronic circuits
- Board or blade insertion into live backplanes
- Inrush current control
- Solid state circuit breakers
- Undervoltage protection
- Current monitor output
