TPS2082DRG4
| Parameters | |
|---|---|
| Package / Case | SOIC |
| Surface Mount | YES |
| Number of Pins | 8 |
| Weight | 75.891673mg |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Resistance | 80mOhm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | 0°C |
| Subcategory | Peripheral Drivers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 3.3V |
| Pin Count | 8 |
| Number of Outputs | 2 |
| Max Output Current | 500mA |
| Operating Supply Voltage | 5.5V |
| Power Supplies | 3/5V |
| Temperature Grade | COMMERCIAL EXTENDED |
| Nominal Supply Current | 85μA |
| Max Supply Current | 85μA |
| Current - Output | 500mA |
| Quiescent Current | 85μA |
| Min Input Voltage | 2.7V |
| Max Input Voltage | 5.5V |
| Nominal Input Voltage | 5.5V |
| Interface IC Type | BUFFER OR INVERTER BASED PERIPHERAL DRIVER |
| Driver Number of Bits | 2 |
| Min Current Limit | 700mA |
| Output Peak Current Limit-Nom | 1A |
| Turn Off Time | 40000 µs |
| Built-in Protections | TRANSIENT; OVER CURRENT; THERMAL; UNDER VOLTAGE |
| Output Current Flow Direction | SINK |
| Height Seated (Max) | 1.75mm |
| Length | 4.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
TPS2082DRG4 Overview
It's included in the SOIC package.The package looks like a Tape & Reel (TR).Total terminations are 8.This device has a terminal position of DUAL.There are a total of 8 pins on it.With a supply voltage of 3.3V, high efficiency is possible.A 8 pin is used for operation.The gadget in Peripheral Drivers is self-contained.For stable operation, 85°C°C is the maximum operating temperature.To maintain reliability, it functions at a minimum working temperature of 0°C degrees Celsius.As far as the power supplies are concerned, the part has the character 3/5V.The default output is 2.In order to meet the operation criteria, the maximum output current must be reduced to 500mA.Hot Swap requires a maximum current of 85μA to operate.Devices with 80mOhm resistance are available.
TPS2082DRG4 Features
The terminal position of 8
TPS2082DRG4 Applications
There are a lot of Texas Instruments TPS2082DRG4 hot swap controllers applications.
- Storage network
- Telecommunications
- Circuit breakers for electronic circuits
- Reverse current protection
- Base station power distribution system
- High power circuit board
- Power monitoring
- Loads
- Backplane
- Inrush current control
