TPS2085D
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Weight | 155.100241mg |
| Operating Temperature | 0°C~125°C TJ |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Feature | Status Flag |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Resistance | 80mOhm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Peripheral Drivers |
| Max Power Dissipation | 1.123W |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 1.27mm |
| Base Part Number | TPS2085 |
| Pin Count | 16 |
| Output Type | N-Channel |
| Max Output Current | 500mA |
| Power Supplies | 3/5V |
| Interface | On/Off |
| Nominal Supply Current | 85μA |
| Output Configuration | High Side |
| Power Dissipation | 1.123W |
| Output Current | 500mA |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Max Supply Current | 85μA |
| Quiescent Current | 85μA |
| Input Type | Non-Inverting |
| Turn On Delay Time | 20 ms |
| Switch Type | General Purpose |
| Min Input Voltage | 2.7V |
| Number of Inputs | 4 |
| Max Input Voltage | 5.5V |
| Nominal Input Voltage | 5.5V |
| Turn-Off Delay Time | 40 ms |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 2.7V~5.5V |
| Driver Number of Bits | 4 |
| Min Current Limit | 700mA |
| Fault Protection | Current Limiting (Fixed), Over Temperature, UVLO |
| Turn On Time | 20000 μs |
| Output Peak Current Limit-Nom | 1A |
| Rds On (Typ) | 80m Ω |
| Built-in Protections | TRANSIENT; OVER CURRENT; THERMAL; UNDER VOLTAGE |
| Height | 1.75mm |
| Length | 9.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS2085D Overview
It is package in Tube case.It is included in the package 16-SOIC (0.154, 3.90mm Width).The lighting driver is mounted in the Surface Mount position.It owns General Purpose switch type.It is recommended to set the temperature to 0°C~125°C TJ in order to ensure reliable operation.A voltage of Not Required is used to power it.A maximum output voltage of N-Channel volts can be obtained with this LED driver.As far as features are concerned, the LED driving board has Status Flag.This object belongs to the TPS2085 family.The termination count is 16.The 16 pins are used for the operation of the system.The LED driving board has a total of 4 functions.Maximum output current falls to 500mA when operation criteria are met.A supply voltage of 3.3V leads to high efficiency.16 pins are connected to it in total.80mOhm resistance is present in the lighting driver.It is set to 500mA in this case.This LED driver is self-contained in an econtainer with a capacity of Peripheral Drivers.This part has a power supply of 3/5V.The maximum input voltage of the LED driver is 5.5V volts.A voltage of 2.7V volts is the minimum input voltage.85μA is the maximum current required to operate it.Inputs are provided at 4.
TPS2085D Features
Supplied from 3.3V
Resistance of 80mOhm
TPS2085D Applications
There are a lot of Texas Instruments TPS2085D Power Switches ICs applications.
- Hard Disk Drives
- PDAs
- Hot Swap
- Wearable Devices
- Hot Swaps
- HDD and SSD
- Set-Top Boxes
- Solid-State Drives
- Various applications equipped with buttons
- Portable/Handheld Devices
