TPS2085DG4
| Parameters | |
|---|---|
| Package / Case | SOIC |
| Surface Mount | YES |
| Number of Pins | 16 |
| Weight | 155.100241mg |
| JESD-609 Code | e4 |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Resistance | 80mOhm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | 0°C |
| Subcategory | Peripheral Drivers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 1.27mm |
| Pin Count | 16 |
| Number of Outputs | 4 |
| Max Output Current | 500mA |
| Operating Supply Voltage | 5.5V |
| Power Supplies | 3/5V |
| Temperature Grade | COMMERCIAL EXTENDED |
| Nominal Supply Current | 85μA |
| Max Supply Current | 85μA |
| Current - Output | 500mA |
| Quiescent Current | 85μA |
| Min Input Voltage | 2.7V |
| Max Input Voltage | 5.5V |
| Nominal Input Voltage | 5.5V |
| Interface IC Type | BUFFER OR INVERTER BASED PERIPHERAL DRIVER |
| Driver Number of Bits | 4 |
| Min Current Limit | 700mA |
| Turn On Time | 20000 μs |
| Output Peak Current Limit-Nom | 1A |
| Built-in Protections | TRANSIENT; OVER CURRENT; THERMAL; UNDER VOLTAGE |
| Output Current Flow Direction | SINK |
| Height | 1.58mm |
| Length | 9.9mm |
| Width | 3.91mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
TPS2085DG4 Overview
In the SOIC package you will find it.16 terminations are present in total.The terminal position of the device is DUAL.In total, it has 16 pins.A supply voltage of 3.3V can result in high efficiency.During operation, 16 pins are used.As far as Peripheral Drivers is concerned, this gadget is self-contained.In order to ensure stable operation, a maximum operating temperature of 85°C°C must be set.To maintain reliability, it functions at a minimum working temperature of 0°C degrees Celsius.Hot-swappable device is important to note that the part has a power supply 3/5V.By default, it produces output 4.When operating criteria are met, the maximum output current is reduced to 500mA.Hot Swap requires a maximum current of 85μA to operate.Devices with 80mOhm resistance are available.
TPS2085DG4 Features
The terminal position of 16
TPS2085DG4 Applications
There are a lot of Texas Instruments TPS2085DG4 hot swap controllers applications.
- Firewire
- Temperature monitor output
- Automatic restart after load failure
- Network switch
- Modern analog communication
- Undervoltage protection
- Raid
- Hard drive
- Circuit breakers for high-side circuits
- Loads
