TPS2086D
| Parameters | |
|---|---|
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Resistance | 80mOhm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Peripheral Drivers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 1.27mm |
| Base Part Number | TPS2086 |
| Pin Count | 16 |
| Output Type | N-Channel |
| Max Output Current | 500mA |
| Operating Supply Voltage | 5.5V |
| Power Supplies | 3/5V |
| Interface | On/Off |
| Nominal Supply Current | 85μA |
| Output Configuration | High Side |
| Power Dissipation | 1.123W |
| Output Current | 500mA |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Max Supply Current | 85μA |
| Quiescent Current | 85μA |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Min Input Voltage | 2.7V |
| Number of Inputs | 4 |
| Max Input Voltage | 5.5V |
| Nominal Input Voltage | 5.5V |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 2.7V~5.5V |
| Driver Number of Bits | 4 |
| Min Current Limit | 700mA |
| Fault Protection | Current Limiting (Fixed), Over Temperature, UVLO |
| Turn On Time | 20000 μs |
| Output Peak Current Limit-Nom | 1A |
| Rds On (Typ) | 80m Ω |
| Built-in Protections | TRANSIENT; OVER CURRENT; THERMAL; UNDER VOLTAGE |
| Height Seated (Max) | 1.75mm |
| Length | 9.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Weight | 155.100241mg |
| Operating Temperature | 0°C~125°C TJ |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Feature | Status Flag |
| Part Status | Obsolete |
TPS2086D Overview
It is packaged in the manner of a Tube.Package 16-SOIC (0.154, 3.90mm Width) contains it.This lighting drivere has a mounting type of Surface Mount.There is a switch type of General Purpose.It is recommended to set the temperature to 0°C~125°C TJ in order to ensure reliable operation.The LED driving board operates at Not Required volts.There is a maximum output voltage of N-Channel volts on this LED driver.In terms of features, the LED driving board has Status Flag.I believe it belongs to the TPS2086 family.In total, there are 16 terminations.For operation, we use the 16 pins.The LED driving board has a total of 4 functions.The maximum output current is reduced to 500mA to meet the operation criteria.Using a voltage of 3.3V allows for high efficiency.A total of 16 pins are included in this LED driver.80mOhm resistance is present in the lighting driver.This case results in a 500mA output current.The LED driver is self-contained in an econtainer with Peripheral Drivers capacity.In this part, the power supply is set to 3/5V.In order to optimize the efficiency of the supply voltage, it should be set to 5.5V.As far as input voltage goes, its maximum is 5.5V volts.As far as input voltage goes, it has a minimum of 2.7V volts.For its operation, a maximum current requirement of 85μA is required.A total of 4 inputs are available.
TPS2086D Features
Supplied from 3.3V
Resistance of 80mOhm
TPS2086D Applications
There are a lot of Texas Instruments TPS2086D Power Switches ICs applications.
- Portable GPS Device
- Storage Drives
- USB Ports/Hubs
- Set-top-box
- USB Power Distribution
- Hot Swaps
- Wireless Modem Data Cards
- HDD and SSD
- Gaming
- PDAs
