Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 1 day ago) |
Mounting Type |
Surface Mount |
Package / Case |
16-SOIC (0.154, 3.90mm Width) |
Surface Mount |
YES |
Number of Pins |
16 |
Weight |
155.100241mg |
Operating Temperature |
0°C~125°C TJ |
Packaging |
Tube |
JESD-609 Code |
e4 |
Feature |
Status Flag |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
16 |
ECCN Code |
EAR99 |
Resistance |
100mOhm |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Subcategory |
Peripheral Drivers |
Max Power Dissipation |
1.123W |
Technology |
CMOS |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
4 |
Supply Voltage |
3.3V |
Terminal Pitch |
1.27mm |
Base Part Number |
TPS2087 |
Pin Count |
16 |
Output Type |
N-Channel |
Max Output Current |
500mA |
Operating Supply Voltage |
5.5V |
Power Supplies |
3/5V |
Interface |
On/Off |
Nominal Supply Current |
85μA |
Output Configuration |
High Side |
Power Dissipation |
1.123W |
Output Current |
500mA |
Voltage - Supply (Vcc/Vdd) |
Not Required |
Max Supply Current |
110μA |
Quiescent Current |
85μA |
Input Type |
Non-Inverting |
Turn On Delay Time |
20 ms |
Switch Type |
General Purpose |
Min Input Voltage |
2.7V |
Number of Inputs |
4 |
Max Input Voltage |
5.5V |
Nominal Input Voltage |
5.5V |
Turn-Off Delay Time |
40 ms |
Ratio - Input:Output |
1:1 |
Voltage - Load |
2.7V~5.5V |
Driver Number of Bits |
4 |
Min Current Limit |
700mA |
Fault Protection |
Current Limiting (Fixed), Over Temperature, UVLO |
Turn On Time |
20000 µs |
Output Peak Current Limit-Nom |
1A |
Rds On (Typ) |
80m Ω |
Built-in Protections |
TRANSIENT; OVER CURRENT; THERMAL; UNDER VOLTAGE |
Height |
1.75mm |
Length |
9.9mm |
Width |
3.91mm |
Thickness |
1.58mm |
Radiation Hardening |
No |
REACH SVHC |
No SVHC |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
TPS2087D Overview
As you can see, it's packaged in the way of a Tube.It's included in the 16-SOIC (0.154, 3.90mm Width) package.A Surface Mount mounting is used for the LED driving board.General Purpose is the switch type it owns.It is recommended to set the temperature to 0°C~125°C TJ in order to ensure reliable operation.Operation is based on a supply voltage of Not Required.Voltage output is N-Channel volts at maximum.The lighting driver has Status Flag features.It belongs to the TPS2087 family.A total of 16 terminations have been found in it.In order to operate, the 16 pins are used.The LED driving board has a total of 4 functions.To meet the operation criteria, the maximum output current drops to 500mA.High efficiency is possible at 3.3V supply voltage.A total of 16 pins are included in this LED driver.It has a resistance of 100mOhm.When this is the case, the output current is set to 500mA.The LED driver is packaged in an econtainer with a capacity of Peripheral Drivers.It has a power supply of 3/5V.It is recommended that the supply voltage be set at 5.5V in order to achieve maximum efficiency.Its maximum input voltage is 5.5V volts.A minimum input voltage of 2.7V volts is required for this LED driver.This system has a maximum current requirement of 110μA.With 4 inputs, it is equipped.
TPS2087D Features
Supplied from 3.3V
Resistance of 100mOhm
TPS2087D Applications
There are a lot of Texas Instruments TPS2087D Power Switches ICs applications.
- Wireless/Networking Cards
- USB Protection
- Solid State Drivers
- Portable GPS
- Low Voltage I/O System Power
- HDD and SSD
- Portable/Handheld Devices
- Hot-Swap Systems
- Notebook PC
- Hot Swap