TPS2087DG4
| Parameters | |
|---|---|
| Weight | 155.100241mg |
| JESD-609 Code | e4 |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Resistance | 80mOhm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | 0°C |
| Subcategory | Peripheral Drivers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 1.27mm |
| Pin Count | 16 |
| Number of Outputs | 4 |
| Max Output Current | 500mA |
| Operating Supply Voltage | 5.5V |
| Power Supplies | 3/5V |
| Temperature Grade | COMMERCIAL EXTENDED |
| Nominal Supply Current | 85μA |
| Max Supply Current | 85μA |
| Current - Output | 500mA |
| Quiescent Current | 85μA |
| Turn On Delay Time | 20 ms |
| Min Input Voltage | 2.7V |
| Max Input Voltage | 5.5V |
| Nominal Input Voltage | 5.5V |
| Turn-Off Delay Time | 40 ms |
| Interface IC Type | BUFFER OR INVERTER BASED PERIPHERAL DRIVER |
| Driver Number of Bits | 4 |
| Min Current Limit | 700mA |
| Turn On Time | 20000 μs |
| Output Peak Current Limit-Nom | 1A |
| Built-in Protections | TRANSIENT; OVER CURRENT; THERMAL; UNDER VOLTAGE |
| Output Current Flow Direction | SINK |
| Height | 1.58mm |
| Length | 9.9mm |
| Width | 3.91mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
| Package / Case | SOIC |
| Surface Mount | YES |
| Number of Pins | 16 |
TPS2087DG4 Overview
The SOIC package contains it.16 terminations are present in total.The terminal position of the device is DUAL.Total number of pins is 16.High efficiency can be achieved by using 3.3V as supply voltage.16 pins are used in operation.As far as Peripheral Drivers is concerned, this gadget is self-contained.Operating at 85°C°C allows for stable operation.For reliability, it must work at a minimum temperature of 0°C degrees Celsius.Part 3/5V is associated with power supplies.By default, it produces output 4.500mA is the maximum output current required to meet the operation criteria.In order for it to operate, a current of 85μA is required.Hot Swap has 80mOhm resistance.
TPS2087DG4 Features
The terminal position of 16
TPS2087DG4 Applications
There are a lot of Texas Instruments TPS2087DG4 hot swap controllers applications.
- Raid
- Networking
- Industrial computers and servers
- Redundant-array-of-independent-disk (RAID) storage
- Network switch
- Microcontrollers
- Redundant negative voltage supplies
- Industrial high-side switches
- Overcurrent protection
- PC board hot swap insertion and removal
