TPS2087DR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Weight | 155.100241mg |
| Operating Temperature | 0°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Feature | Status Flag |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Resistance | 80mOhm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Peripheral Drivers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 1.27mm |
| Base Part Number | TPS2087 |
| Pin Count | 16 |
| Output Type | N-Channel |
| Max Output Current | 500mA |
| Operating Supply Voltage | 5.5V |
| Power Supplies | 3/5V |
| Interface | On/Off |
| Nominal Supply Current | 85μA |
| Output Configuration | High Side |
| Output Current | 500mA |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Max Supply Current | 85μA |
| Quiescent Current | 85μA |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Min Input Voltage | 2.7V |
| Number of Inputs | 4 |
| Max Input Voltage | 5.5V |
| Nominal Input Voltage | 5.5V |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 2.7V~5.5V |
| Driver Number of Bits | 4 |
| Min Current Limit | 700mA |
| Fault Protection | Current Limiting (Fixed), Over Temperature, UVLO |
| Turn On Time | 20000 μs |
| Output Peak Current Limit-Nom | 1A |
| Rds On (Typ) | 80m Ω |
| Built-in Protections | TRANSIENT; OVER CURRENT; THERMAL; UNDER VOLTAGE |
| Height | 1.75mm |
| Length | 9.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS2087DR Overview
It's?packaged?in?the way?of?a?Tape & Reel (TR).Package 16-SOIC (0.154, 3.90mm Width) contains it.A Surface Mount mounting is used for the LED driving board.General Purpose is the type of switch owned by it.To ensure reliable performance, the temperature should be set to 0°C~125°C TJ.A voltage of Not Required is used to power it.There is a maximum output voltage of N-Channel volts on this LED driver.The lighting driver has Status Flag features.It is a member of the TPS2087 family.It consists of 16 terminations in total.During operation, the 16 pins are used.The LED driver has 4 functions.The maximum output current is reduced to 500mA to meet the operation criteria.The supply voltage can be 3.3V for high efficiency.This LED driver is equipped with a total of 16 pins.The LED driver has 80mOhm resistance.When this is the case, the output current is set to 500mA.There is a Peripheral Drivers capacity container for this LED driver that is self-contained.This part is powered by 3/5V.In order to achieve the best efficiency, the supply voltage should be set to 5.5V.Its maximum input voltage is 5.5V volts.A minimum input voltage of 2.7V volts is required for this LED driver.For its operation, a current of 85μA is required.It is equipped with 4 input.
TPS2087DR Features
Supplied from 3.3V
Resistance of 80mOhm
TPS2087DR Applications
There are a lot of Texas Instruments TPS2087DR Power Switches ICs applications.
- Portable GPS Device
- PC Cards
- Smartphone and PDA
- Portable/Handheld Devices
- PC Card Hot Swap
- USB Power Distribution
- Storage (HDDs, SSDs)
- Wireless/Networking Cards
- Solid State Drivers
- Notebook PC
