Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 1 week ago) |
Mounting Type |
Surface Mount |
Package / Case |
16-SOIC (0.154, 3.90mm Width) |
Surface Mount |
YES |
Number of Pins |
16 |
Weight |
155.100241mg |
Operating Temperature |
0°C~125°C TJ |
Packaging |
Tape & Reel (TR) |
JESD-609 Code |
e4 |
Feature |
Status Flag |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
16 |
ECCN Code |
EAR99 |
Resistance |
80mOhm |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Subcategory |
Peripheral Drivers |
Technology |
CMOS |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
4 |
Supply Voltage |
3.3V |
Terminal Pitch |
1.27mm |
Base Part Number |
TPS2087 |
Pin Count |
16 |
Output Type |
N-Channel |
Max Output Current |
500mA |
Operating Supply Voltage |
5.5V |
Power Supplies |
3/5V |
Interface |
On/Off |
Nominal Supply Current |
85μA |
Output Configuration |
High Side |
Output Current |
500mA |
Voltage - Supply (Vcc/Vdd) |
Not Required |
Max Supply Current |
85μA |
Quiescent Current |
85μA |
Input Type |
Non-Inverting |
Switch Type |
General Purpose |
Min Input Voltage |
2.7V |
Number of Inputs |
4 |
Max Input Voltage |
5.5V |
Nominal Input Voltage |
5.5V |
Ratio - Input:Output |
1:1 |
Voltage - Load |
2.7V~5.5V |
Driver Number of Bits |
4 |
Min Current Limit |
700mA |
Fault Protection |
Current Limiting (Fixed), Over Temperature, UVLO |
Turn On Time |
20000 μs |
Output Peak Current Limit-Nom |
1A |
Rds On (Typ) |
80m Ω |
Built-in Protections |
TRANSIENT; OVER CURRENT; THERMAL; UNDER VOLTAGE |
Height |
1.75mm |
Length |
9.9mm |
Width |
3.91mm |
Thickness |
1.58mm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
TPS2087DRG4 Overview
The package is in the form of a Tape & Reel (TR).Package 16-SOIC (0.154, 3.90mm Width) contains it.The LED driver is mounted as Surface Mount.General Purpose is the switch type it owns.The temperature should be set to 0°C~125°C TJ to ensure reliable functioning.The LED driving board operates with a supply voltage of Not Required.It produces a maximum output voltage of N-Channel volts at its maximum output.In terms of features, the LED driving board has Status Flag.It comes under the family of TPS2087.As a result, there are 16 terminations.The 16 pins are used for the operation of the system.As far as the lighting driver is concerned, there are 4 functions.In order to meet the operation criteria, the maximum output current drops to 500mA.It is possible to obtain high efficiency with a supply voltage of 3.3V.A total of 16 pins are included in this LED driver.Currently, the LED driving board has a resistance of 80mOhm ohms.When this is the case, the output current is set to 500mA.A container with a capacity of Peripheral Drivers contains this self-contained lighting driver.It has a power supply of 3/5V.Optimal efficiency requires a voltage of 5.5V.Voltage input is limited to 5.5V volts.It has a 2.7V volt minimum input voltage.The maximum current required for its operation is 85μA.There are 4 inputs available.
TPS2087DRG4 Features
Supplied from 3.3V
Resistance of 80mOhm
TPS2087DRG4 Applications
There are a lot of Texas Instruments TPS2087DRG4 Power Switches ICs applications.
- Wireless/Networking Cards
- USB Power Distribution
- Smartphone and PDA
- Hot Swaps
- PC Card Hot Swap
- PDAs
- USB Ports/Hubs
- HDD, SSD
- Set-top-box
- Portable GPS