banner_page

TPS2090D

3/5V N-Channel PMIC TPS2090 8 Pin 3.3V 8-SOIC (0.154, 3.90mm Width)


  • Manufacturer: Texas Instruments
  • Nocochips NO: 815-TPS2090D
  • Package: 8-SOIC (0.154, 3.90mm Width)
  • Datasheet: -
  • Stock: 396
  • Description: 3/5V N-Channel PMIC TPS2090 8 Pin 3.3V 8-SOIC (0.154, 3.90mm Width) (Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Lifecycle Status ACTIVE (Last Updated: 1 day ago)
Mounting Type Surface Mount
Package / Case 8-SOIC (0.154, 3.90mm Width)
Surface Mount YES
Number of Pins 8
Weight 75.891673mg
Operating Temperature 0°C~125°C TJ
Packaging Tube
JESD-609 Code e4
Feature Status Flag
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 8
ECCN Code EAR99
Resistance 80mOhm
Terminal Finish Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory Peripheral Drivers
Technology MOS
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 2
Supply Voltage 3.3V
Base Part Number TPS2090
Pin Count 8
Output Type N-Channel
Max Output Current 250mA
Operating Supply Voltage 5.5V
Power Supplies 3/5V
Interface On/Off
Nominal Supply Current 85μA
Output Configuration High Side
Power Dissipation 725mW
Output Current 250mA
Voltage - Supply (Vcc/Vdd) Not Required
Max Supply Current 85μA
Quiescent Current 85μA
Input Type Non-Inverting
Turn On Delay Time 20 ms
Switch Type General Purpose
Min Input Voltage 2.7V
Number of Inputs 2
Max Input Voltage 5.5V
Nominal Input Voltage 5.5V
Turn-Off Delay Time 40 ms
Ratio - Input:Output 1:1
Voltage - Load 2.7V~5.5V
Driver Number of Bits 2
Min Current Limit 300mA
Fault Protection Current Limiting (Fixed), Over Temperature, UVLO
Output Peak Current Limit-Nom 0.5A
Rds On (Typ) 80m Ω
Turn Off Time 40000 µs
Built-in Protections OVER CURRENT; THERMAL; UNDER VOLTAGE
Height 1.75mm
Length 4.9mm
Width 3.91mm
Thickness 1.58mm
Radiation Hardening No
REACH SVHC No SVHC
RoHS Status ROHS3 Compliant
Lead Free Lead Free

TPS2090D Overview


It is packaged in the form of a Tube.This package is included in 8-SOIC (0.154, 3.90mm Width).A Surface Mount mounting is used for the LED driving board.It owns the General Purpose switch type.To ensure reliable performance, the temperature should be set to 0°C~125°C TJ.In order to operate, it requires a voltage supply of Not Required.A maximum output voltage of N-Channel volts can be achieved by this LED driver.In terms of features, the LED driving board has Status Flag.It is part of the TPS2090 family of LED drivers.It contains 8 terminations.The operation is carried out using the 8 pins.As far as the lighting driver is concerned, there are 2 functions.The maximum output current drops to 250mA in order to meet the operation criteria.The supply voltage can be 3.3V for high efficiency.As a result, it has a total of 8 pins.In this LED driving board, there is 80mOhm resistance.This case has the output current set to 250mA.The LED driver is packaged in an econtainer with a capacity of Peripheral Drivers.A 3/5V power supply is used by the part.It is recommended that the supply voltage be set at 5.5V in order to achieve maximum efficiency.This LED driving board can accept voltages up to 5.5V volts as an input.There is a minimum input voltage of 2.7V volts.A maximum current requirement of 85μA is required for its operation.The lighting driver is equipped with 2 inputs.

TPS2090D Features


Supplied from 3.3V
Resistance of 80mOhm

TPS2090D Applications


There are a lot of Texas Instruments TPS2090D Power Switches ICs applications.

  • USB Ports/Hubs
  • HDD, SSD
  • PDAs
  • Notebook PC
  • Hot Swap
  • Handheld Devices
  • USB Protection
  • HDD and SSD
  • Solid State Drivers
  • Portable/Handheld Devices

Write a review

Note: HTML is not translated!
    Bad           Good