Parameters |
Lifecycle Status |
LIFEBUY (Last Updated: 1 day ago) |
Mounting Type |
Surface Mount |
Package / Case |
8-SOIC (0.154, 3.90mm Width) |
Surface Mount |
YES |
Number of Pins |
8 |
Weight |
75.891673mg |
Operating Temperature |
0°C~125°C TJ |
Packaging |
Tube |
JESD-609 Code |
e4 |
Feature |
Status Flag |
Pbfree Code |
yes |
Part Status |
Last Time Buy |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
8 |
ECCN Code |
EAR99 |
Resistance |
80mOhm |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Subcategory |
Peripheral Drivers |
Technology |
MOS |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
2 |
Supply Voltage |
3.3V |
Base Part Number |
TPS2091 |
Pin Count |
8 |
Output Type |
N-Channel |
Max Output Current |
250mA |
Operating Supply Voltage |
5.5V |
Power Supplies |
3/5V |
Interface |
On/Off |
Nominal Supply Current |
85μA |
Output Configuration |
High Side |
Power Dissipation |
725mW |
Output Current |
250mA |
Voltage - Supply (Vcc/Vdd) |
Not Required |
Max Supply Current |
85μA |
Quiescent Current |
85μA |
Input Type |
Non-Inverting |
Turn On Delay Time |
20 ms |
Switch Type |
General Purpose |
Min Input Voltage |
2.7V |
Number of Inputs |
2 |
Max Input Voltage |
5.5V |
Nominal Input Voltage |
5.5V |
Turn-Off Delay Time |
40 ms |
Ratio - Input:Output |
1:1 |
Input Characteristics |
STANDARD |
Voltage - Load |
2.7V~5.5V |
Driver Number of Bits |
2 |
Min Current Limit |
300mA |
Fault Protection |
Current Limiting (Fixed), Over Temperature, UVLO |
Output Peak Current Limit-Nom |
0.5A |
Rds On (Typ) |
80m Ω |
Turn Off Time |
40000 µs |
Built-in Protections |
OVER CURRENT; THERMAL; UNDER VOLTAGE |
Height |
1.75mm |
Length |
4.9mm |
Width |
3.91mm |
Thickness |
1.58mm |
Radiation Hardening |
No |
REACH SVHC |
No SVHC |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
TPS2091D Overview
It's?packaged?in?the way?of?a?Tube.It's included in the 8-SOIC (0.154, 3.90mm Width) package.This LED driving board is mounted using the mounting type Surface Mount.This switch is of type General Purpose.It is recommended to set the temperature to 0°C~125°C TJ in order to ensure reliable operation.Operation is based on a supply voltage of Not Required.There is a maximum output voltage of N-Channel volts.As far as features are concerned, the LED driving board has Status Flag.It belongs to the family TPS2091.As a result, there are 8 terminations.During operation, the 8 pins are used.Currently, there are 2 functions associated with the lighting driver.It is necessary to reduce the maximum output current to 250mA to meet the operation criteria.The supply voltage can be 3.3V for high efficiency.There are 8 pins in total on this board.Currently, the LED driving board has a resistance of 80mOhm ohms.It is set to 250mA in this case.A self-contained LED driver with a capacity of Peripheral Drivers is contained in an econtainer.In this part, the power supply is set to 3/5V.For maximum efficiency, the supply voltage should be set to 5.5V.Input voltage is limited to 5.5V volts.Input voltage must be at least 2.7V volts.A maximum current requirement of 85μA is required for its operation.The lighting driver is equipped with 2 inputs.
TPS2091D Features
Supplied from 3.3V
Resistance of 80mOhm
TPS2091D Applications
There are a lot of Texas Instruments TPS2091D Power Switches ICs applications.
- Solid-State Drives
- Wireless/Networking Cards
- PDAs
- HDD and SSD
- Handheld Devices
- Notebook and Tablet Computers
- Portable GPS Device
- Telecom and Network Systems
- HDD, SSD
- PC Cards