TPS2091DRG4

3/5V N-Channel PMIC TPS2091 8 Pin 3.3V 8-SOIC (0.154, 3.90mm Width)

Manufacturer: Texas Instruments
Nocochips NO: 815-TPS2091DRG4
Package: 8-SOIC (0.154, 3.90mm Width)
Datasheet: PDF
Stock: 369
Description: 3/5V N-Channel PMIC TPS2091 8 Pin 3.3V 8-SOIC (0.154, 3.90mm Width) (Kg)

Details

Tags

Parameters
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	8-SOIC (0.154, 3.90mm Width)
Number of Pins	8
Weight	75.891673mg
Operating Temperature	0°C~125°C TJ
Packaging	Tape & Reel (TR)
Feature	Status Flag
Part Status	Obsolete
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	8
ECCN Code	EAR99
Subcategory	Peripheral Drivers
Technology	MOS
Terminal Position	DUAL
Terminal Form	GULL WING
Number of Functions	2
Supply Voltage	3.3V
Base Part Number	TPS2091
Pin Count	8
Number of Outputs	2
Output Type	N-Channel
Max Output Current	250mA
Operating Supply Voltage	5.5V
Power Supplies	3/5V
Interface	On/Off
Output Configuration	High Side
Voltage - Supply (Vcc/Vdd)	Not Required
Quiescent Current	85μA
Input Type	Non-Inverting
Switch Type	General Purpose
Min Input Voltage	2.7V
Max Input Voltage	5.5V
Nominal Input Voltage	5.5V
Ratio - Input:Output	1:1
Voltage - Load	2.7V~5.5V
Driver Number of Bits	2
Fault Protection	Current Limiting (Fixed), Over Temperature, UVLO
Output Peak Current Limit-Nom	0.5A
Rds On (Typ)	80m Ω
Turn Off Time	40000 µs
Built-in Protections	OVER CURRENT; THERMAL; UNDER VOLTAGE
Output Current Flow Direction	SINK
Height Seated (Max)	1.75mm
Length	4.9mm
Width	3.9mm
Radiation Hardening	No
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

TPS2091DRG4 Overview

The package is in the form of a Tape & Reel (TR).This file is included in package 8-SOIC (0.154, 3.90mm Width).It has been mounted as Surface Mount on the LED driver.General Purpose is the switch type it owns.It is recommended that the temperature be set to 0°C~125°C TJ for reliable operation.The LED driver is equipped with 2 outputs.A voltage of Not Required is used to power it.There is a maximum output voltage of N-Channel volts on this LED driver.The lighting driver has Status Flag features.It is part of the TPS2091 family of LED drivers.There are 8 terminations in it.For operation, 8 pins are used.As far as the lighting driver is concerned, there are 2 functions.The maximum output current drops to 250mA in order to meet the operation criteria.High efficiency is possible when the supply voltage is set to 3.3V.Surface Mount is mounted in the way of this lighting driver.There are 8 pins in total on this board.Self-contained in an econtainer with a capacity of Peripheral Drivers, this LED driver is self-contained.In this case, the power supply is 3/5V.When using this LED driving board, it is recommended that the supply voltage is set to 5.5V.Voltage input is limited to 5.5V volts.As far as input voltage goes, it has a minimum of 2.7V volts.