TPS2092DG4
| Parameters | |
|---|---|
| Package / Case | SOIC |
| Surface Mount | YES |
| Number of Pins | 8 |
| Weight | 75.891673mg |
| JESD-609 Code | e4 |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Resistance | 80mOhm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | 0°C |
| Subcategory | Peripheral Drivers |
| Technology | MOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 3.3V |
| Pin Count | 8 |
| Number of Outputs | 2 |
| Max Output Current | 250mA |
| Operating Supply Voltage | 5.5V |
| Power Supplies | 3/5V |
| Temperature Grade | OTHER |
| Nominal Supply Current | 85μA |
| Max Supply Current | 85μA |
| Current - Output | 250mA |
| Quiescent Current | 85μA |
| Min Input Voltage | 2.7V |
| Max Input Voltage | 5.5V |
| Nominal Input Voltage | 5.5V |
| Interface IC Type | BUFFER OR INVERTER BASED PERIPHERAL DRIVER |
| Driver Number of Bits | 2 |
| Min Current Limit | 300mA |
| Output Peak Current Limit-Nom | 0.5A |
| Turn Off Time | 40000 µs |
| Built-in Protections | OVER CURRENT; THERMAL; UNDER VOLTAGE |
| Output Current Flow Direction | SINK |
| Height | 1.58mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
TPS2092DG4 Overview
This is included in the SOIC package.Hot-swappable device has a total of 8 terminations.In this case, the device is located at terminal DUAL.In total, there are 8 pins on it.A supply voltage of 3.3V can result in high efficiency.For operation, 8 pins are used.Peripheral Drivers contains this gadget on its own.For stable operation, 85°C°C is the maximum operating temperature.Hot-swappable device functions at a minimum working temperature of 0°C degrees Celsius in order to maintain reliabilHot-swappable devicey.The power supplies of the part is 3/5V.By default, it is set to output 2.When operating criteria are met, the maximum output current is reduced to 250mA.During operation, it will require a maximum current of 85μA.Despite its 80mOhm resistance, the device is not easily damaged.
TPS2092DG4 Features
The terminal position of 8
TPS2092DG4 Applications
There are a lot of Texas Instruments TPS2092DG4 hot swap controllers applications.
- USB interface
- Raid
- Disconnect faulty loads before supply voltage drops
- Redundant negative voltage supplies
- Short circuit protection
- Remote access server
- Other forms of communications infrastructure
- Overcurrent protection
- Base station
- Continuous monitoring of device temperature
