Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 4 days ago) |
Contact Plating |
Gold |
Mounting Type |
Surface Mount |
Package / Case |
8-SOIC (0.154, 3.90mm Width) |
Surface Mount |
YES |
Number of Pins |
8 |
Weight |
75.891673mg |
Operating Temperature |
0°C~125°C TJ |
Packaging |
Tape & Reel (TR) |
JESD-609 Code |
e4 |
Feature |
Status Flag |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
8 |
ECCN Code |
EAR99 |
Resistance |
80mOhm |
Subcategory |
Peripheral Drivers |
Technology |
MOS |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
2 |
Supply Voltage |
3.3V |
Base Part Number |
TPS2092 |
Pin Count |
8 |
Output Type |
N-Channel |
Max Output Current |
250mA |
Operating Supply Voltage |
5.5V |
Power Supplies |
3/5V |
Interface |
On/Off |
Nominal Supply Current |
85μA |
Output Configuration |
High Side |
Output Current |
250mA |
Voltage - Supply (Vcc/Vdd) |
Not Required |
Max Supply Current |
85μA |
Quiescent Current |
85μA |
Input Type |
Non-Inverting |
Switch Type |
General Purpose |
Min Input Voltage |
2.7V |
Number of Inputs |
2 |
Max Input Voltage |
5.5V |
Nominal Input Voltage |
5.5V |
Ratio - Input:Output |
1:1 |
Input Characteristics |
STANDARD |
Voltage - Load |
2.7V~5.5V |
Driver Number of Bits |
2 |
Min Current Limit |
300mA |
Fault Protection |
Current Limiting (Fixed), Over Temperature, UVLO |
Output Peak Current Limit-Nom |
0.5A |
Rds On (Typ) |
80m Ω |
Turn Off Time |
40000 µs |
Built-in Protections |
OVER CURRENT; THERMAL; UNDER VOLTAGE |
Height |
1.75mm |
Length |
4.9mm |
Width |
3.91mm |
Thickness |
1.58mm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
TPS2092DR Overview
As you can see, it's packaged in the way of a Tape & Reel (TR).The 8-SOIC (0.154, 3.90mm Width) package contains it.The mounting type of the LED driver is Surface Mount.It owns the General Purpose switch type.To ensure reliable operation, the temperature should be set to 0°C~125°C TJ.Operation is based on Not Required supply voltage.A maximum output voltage of N-Channel volts can be obtained with this LED driver.It is equipped with Status Flag features.It belongs to the family TPS2092.It contains 8 terminations.It is necessary to use the 8 pins in order to operate the LED driver.It is important to note that the LED driving board has 2 functions.In order to meet the operation criteria, the maximum output current drops to 250mA.High efficiency is possible at 3.3V supply voltage.A total of 8 pins are included in this LED driver.Currently, the LED driving board has 80mOhm resistance.When this case is used, the output current is set to 250mA.It is self-contained in an econtainer with a capacity of Peripheral Drivers.There is a voltage supply of 3/5V volts on this part.In order to achieve the best efficiency, the supply voltage should be set to 5.5V.As far as input voltage goes, its maximum is 5.5V volts.As a minimum input voltage, it requires 2.7V volts.For its operation, a maximum current requirement of 85μA is required.There are 2 inputs available.
TPS2092DR Features
Supplied from 3.3V
Resistance of 80mOhm
TPS2092DR Applications
There are a lot of Texas Instruments TPS2092DR Power Switches ICs applications.
- HDD and SSD
- Telecom and Network Systems
- Solid-State Drives
- USB Power Distribution
- PC Card Hot Swap
- HDD, SSD
- USB Power Distribution
- Gaming
- Portable GPS Device
- Various applications equipped with buttons