TPS2095D
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Weight | 155.100241mg |
| Operating Temperature | 0°C~125°C TJ |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Feature | Status Flag |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Resistance | 80mOhm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Peripheral Drivers |
| Technology | MOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 1.27mm |
| Base Part Number | TPS2095 |
| Pin Count | 16 |
| Output Type | N-Channel |
| Max Output Current | 250mA |
| Operating Supply Voltage | 5.5V |
| Power Supplies | 3/5V |
| Interface | On/Off |
| Nominal Supply Current | 85μA |
| Output Configuration | High Side |
| Output Current | 250mA |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Max Supply Current | 85μA |
| Quiescent Current | 85μA |
| Input Type | Non-Inverting |
| Turn On Delay Time | 20 ms |
| Switch Type | General Purpose |
| Min Input Voltage | 2.7V |
| Number of Inputs | 4 |
| Max Input Voltage | 5.5V |
| Nominal Input Voltage | 5.5V |
| Turn-Off Delay Time | 40 ms |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 2.7V~5.5V |
| Driver Number of Bits | 4 |
| Min Current Limit | 300mA |
| Fault Protection | Current Limiting (Fixed), Over Temperature, UVLO |
| Turn On Time | 20000 µs |
| Output Peak Current Limit-Nom | 0.5A |
| Rds On (Typ) | 80m Ω |
| Built-in Protections | OVER CURRENT; THERMAL; UNDER VOLTAGE |
| Height | 1.75mm |
| Length | 9.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS2095D Overview
The package is in the form of a Tube.There is a package for it in the 16-SOIC (0.154, 3.90mm Width) package.In this case, the LED driving board is mounted as Surface Mount.General Purpose is the switch type it owns.In order to guarantee reliable performance, the temperature should be set to 0°C~125°C TJ.It uses a supply voltage of Not Required to operate.A maximum voltage of N-Channel volts is available from the output of this LED driver.It is equipped with Status Flag features.It is part of the TPS2095 family of LED drivers.There are 16 terminations in it.16 pins are used for operation.It has 4 functions.This results in the maximum output current dropping to 250mA to meet the operation criteria.It is possible to obtain high efficiency with a supply voltage of 3.3V.16 pins are equipped with it.80mOhm is the resistance of the lighting driver.In this case, the output current will be set to 250mA.The LED driver is packaged in an econtainer with a capacity of Peripheral Drivers.This part's power supply is 3/5V.It is recommended to set the supply voltage to 5.5V for optimum efficiency.This LED driver can handle voltages up to 5.5V volts.As a minimum input voltage, it requires 2.7V volts.85μA is the maximum current required to operate it.It has 4 inputs.
TPS2095D Features
Supplied from 3.3V
Resistance of 80mOhm
TPS2095D Applications
There are a lot of Texas Instruments TPS2095D Power Switches ICs applications.
- Portable GPS
- Wireless Headsets
- Low Voltage I/O System Power
- Storage Drives
- USB Power Distribution
- Various applications equipped with buttons
- Wearable Devices
- Notebook and Tablet Computers
- Hot-Swap Systems
- Portable Devices
