TPS2095DR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | 0°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Feature | Status Flag |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Peripheral Drivers |
| Technology | MOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | TPS2095 |
| Pin Count | 16 |
| Number of Outputs | 4 |
| Qualification Status | Not Qualified |
| Output Type | N-Channel |
| Operating Supply Voltage | 5.5V |
| Power Supplies | 3/5V |
| Interface | On/Off |
| Current - Output (Max) | 250mA |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Supply Current-Max | 0.11mA |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Min Input Voltage | 2.7V |
| Max Input Voltage | 5.5V |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 2.7V~5.5V |
| Driver Number of Bits | 4 |
| Fault Protection | Current Limiting (Fixed), Over Temperature, UVLO |
| Turn On Time | 20000 µs |
| Output Peak Current Limit-Nom | 0.5A |
| Rds On (Typ) | 80m Ω |
| Built-in Protections | OVER CURRENT; THERMAL; UNDER VOLTAGE |
| Output Current Flow Direction | SINK |
| Height | 1.75mm |
| Length | 9.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS2095DR Overview
As you can see, it's packaged in the way of a Tape & Reel (TR).In the 16-SOIC (0.154, 3.90mm Width) package, it is included.In this case, the LED driving board is mounted as Surface Mount.This switch is of type General Purpose.Keeping the temperature at 0°C~125°C TJ ensures reliable operation.There are 4 outputs available on this lighting driver.In order to operate, it requires a voltage supply of Not Required.A maximum output voltage of N-Channel volts can be achieved by this LED driver.A lighting driver with Status Flag features is available.It belongs to the family TPS2095.In total, there are 16 terminations.During operation, the 16 pins are used.It is important to note that the LED driving board has 4 functions.There is a maximum output of 250mAV from the LED driver.The supply voltage of 3.3V is conducive to high efficiency.There are 16 pins in total on this board.A self-contained econtainer holding Peripheral Drivers capacity contains this lighting driver.The power supply of the part is 3/5V.When using this LED driving board, it is recommended that the supply voltage is set to 5.5V.Voltage input is limited to 5.5V volts.Input voltage must be at least 2.7V volts.
TPS2095DR Features
Supplied from 3.3V
TPS2095DR Applications
There are a lot of Texas Instruments TPS2095DR Power Switches ICs applications.
- USB Power Distribution
- Wireless/Networking Cards
- Solid State Drivers
- Notebook and Tablet Computers
- Hot Swap
- Portable GPS Device
- HDD, SSD
- Handheld Devices
- Storage Drives
- Hot Swap
