TPS2096DG4
| Parameters | |
|---|---|
| Lifecycle Status | LIFEBUY (Last Updated: 5 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Weight | 155.100241mg |
| Operating Temperature | 0°C~125°C TJ |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Feature | Status Flag |
| Pbfree Code | yes |
| Part Status | Last Time Buy |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Resistance | 80mOhm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Peripheral Drivers |
| Technology | MOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 1.27mm |
| Base Part Number | TPS2096 |
| Pin Count | 16 |
| Output Type | N-Channel |
| Max Output Current | 250mA |
| Operating Supply Voltage | 5.5V |
| Power Supplies | 3/5V |
| Interface | On/Off |
| Nominal Supply Current | 85μA |
| Output Configuration | High Side |
| Output Current | 250mA |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Max Supply Current | 85μA |
| Quiescent Current | 85μA |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Min Input Voltage | 2.7V |
| Number of Inputs | 4 |
| Max Input Voltage | 5.5V |
| Nominal Input Voltage | 5.5V |
| Ratio - Input:Output | 1:1 |
| Input Characteristics | STANDARD |
| Voltage - Load | 2.7V~5.5V |
| Driver Number of Bits | 4 |
| Min Current Limit | 300mA |
| Fault Protection | Current Limiting (Fixed), Over Temperature, UVLO |
| Turn On Time | 20000 µs |
| Output Peak Current Limit-Nom | 0.5A |
| Rds On (Typ) | 80m Ω |
| Built-in Protections | OVER CURRENT; THERMAL; UNDER VOLTAGE |
| Height | 1.75mm |
| Length | 9.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS2096DG4 Overview
Tube is how it's packaged.There is a package for it in the 16-SOIC (0.154, 3.90mm Width) package.The mounting type of the LED driver is Surface Mount.General Purpose is the type of switch owned by it.To ensure reliable performance, the temperature should be set to 0°C~125°C TJ.The LED driving board operates at Not Required volts.The maximum output voltage is N-Channel volts.As far as features are concerned, the LED driving board has Status Flag.As you can see, it comes from the TPS2096 family.There are 16 terminations in it.The 16 pins are used for the operation of the system.The LED driver has 4 functions.It is necessary to reduce the maximum output current to 250mA to meet the operation criteria.As long as the supply voltage is 3.3V, high efficiency can be achieved.As a result, it has a total of 16 pins.Currently, the LED driving board has a resistance of 80mOhm ohms.The output current is set to 250mA in this case.It is self-contained in an econtainer with a capacity of Peripheral Drivers.3/5V is the power supply of the part.In order to optimize the efficiency of the supply voltage, it should be set to 5.5V.The maximum input voltage is 5.5V volts.A voltage of 2.7V volts is the minimum input voltage.It requires a maximum current requirement of 85μA.The lighting driver is equipped with 4 inputs.
TPS2096DG4 Features
Supplied from 3.3V
Resistance of 80mOhm
TPS2096DG4 Applications
There are a lot of Texas Instruments TPS2096DG4 Power Switches ICs applications.
- Storage Drives
- Smart Phones, Feature Phones
- Hot-Swap Systems
- Hot Swaps
- Portable Video Game Players
- Wireless Headsets
- USB Ports/Hubs
- Mobile Communication Devices
- Various applications equipped with buttons
- PC Cards
