TPS2097D
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Weight | 155.100241mg |
| Operating Temperature | 0°C~125°C TJ |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Feature | Status Flag |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Resistance | 80mOhm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Peripheral Drivers |
| Technology | MOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 1.27mm |
| Base Part Number | TPS2097 |
| Pin Count | 16 |
| Output Type | N-Channel |
| Max Output Current | 250mA |
| Operating Supply Voltage | 5.5V |
| Power Supplies | 3/5V |
| Interface | On/Off |
| Nominal Supply Current | 85μA |
| Output Configuration | High Side |
| Output Current | 250mA |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Max Supply Current | 85μA |
| Quiescent Current | 85μA |
| Input Type | Non-Inverting |
| Turn On Delay Time | 20 ms |
| Switch Type | General Purpose |
| Min Input Voltage | 2.7V |
| Number of Inputs | 4 |
| Max Input Voltage | 5.5V |
| Nominal Input Voltage | 5.5V |
| Turn-Off Delay Time | 40 ms |
| Ratio - Input:Output | 1:1 |
| Input Characteristics | STANDARD |
| Voltage - Load | 2.7V~5.5V |
| Driver Number of Bits | 4 |
| Min Current Limit | 300mA |
| Fault Protection | Current Limiting (Fixed), Over Temperature, UVLO |
| Turn On Time | 20000 µs |
| Output Peak Current Limit-Nom | 0.5A |
| Rds On (Typ) | 80m Ω |
| Built-in Protections | OVER CURRENT; THERMAL; UNDER VOLTAGE |
| Height | 1.75mm |
| Length | 9.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS2097D Overview
It is packaged in the manner of a Tube.The 16-SOIC (0.154, 3.90mm Width) package contains it.The lighting driver is mounted in the Surface Mount position.The switch type of this switch is General Purpose.It is recommended that the temperature be set to 0°C~125°C TJ for reliable performance.The LED driving board is powered by a voltage of Not Required.It produces a maximum output voltage of N-Channel volts at its maximum output.As far as features are concerned, the LED driving board has Status Flag.As you can see, it comes from the TPS2097 family.A total of 16 terminations have been found in it.For operation, 16 pins are used.As far as the lighting driver is concerned, there are 4 functions.The maximum output current drops to 250mA in order to meet the operation criteria.It is possible to achieve a high level of efficiency with a supply voltage of 3.3V.The LED driving board is equipped with a total of 16 pins.It has a resistance of 80mOhm.This results in a 250mA output current.The LED driver is packaged in an econtainer with a capacity of Peripheral Drivers.This part is powered by 3/5V.In order to maximize efficiency, the supply voltage should be set to 5.5V.As far as input voltage goes, its maximum is 5.5V volts.It has a 2.7V volt minimum input voltage.The maximum current required for its operation is 85μA.We have available 4 inputs.
TPS2097D Features
Supplied from 3.3V
Resistance of 80mOhm
TPS2097D Applications
There are a lot of Texas Instruments TPS2097D Power Switches ICs applications.
- Portable Music Players
- Portable GPS Device
- Handheld Devices
- Notebook PC
- Gaming
- Storage Drives
- PC Cards
- Hard Disk Drives
- Solid State Drivers
- USB Ports/Hubs
