TPS2097DR
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Weight | 155.100241mg |
| Operating Temperature | 0°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| Feature | Status Flag |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Subcategory | Peripheral Drivers |
| Technology | MOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 4 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 1.27mm |
| Reach Compliance Code | unknown |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | TPS2097 |
| Pin Count | 16 |
| Number of Outputs | 4 |
| Qualification Status | Not Qualified |
| Output Type | N-Channel |
| Operating Supply Voltage | 5.5V |
| Power Supplies | 3/5V |
| Interface | On/Off |
| Output Configuration | High Side |
| Output Current | 250mA |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Quiescent Current | 85μA |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Min Input Voltage | 2.7V |
| Max Input Voltage | 5.5V |
| Nominal Input Voltage | 5.5V |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 2.7V~5.5V |
| Driver Number of Bits | 4 |
| Fault Protection | Current Limiting (Fixed), Over Temperature, UVLO |
| Turn On Time | 20000 μs |
| Output Peak Current Limit-Nom | 0.5A |
| Rds On (Typ) | 80m Ω |
| Built-in Protections | OVER CURRENT; THERMAL; UNDER VOLTAGE |
| Height Seated (Max) | 1.75mm |
| Length | 9.9mm |
| Width | 3.9mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS2097DR Overview
It is packaged in the form of a Tape & Reel (TR).This file is included in package 16-SOIC (0.154, 3.90mm Width).This lighting drivere has a mounting type of Surface Mount.The switch type is General Purpose.Ensure reliable operation by setting the temperature to 0°C~125°C TJ.The lighting driver has a total of 4 outputs that are available for use.The LED driving board operates with a supply voltage of Not Required.The maximum output voltage is N-Channel volts.It has a total of Status Flag features.It is a member of the TPS2097 family.As a result, there are 16 terminations.For operation, we use the 16 pins.The LED driver has 4 functions.It is possible to obtain high efficiency with a supply voltage of 3.3V.The lighting driver is mounted in the direction of Surface Mount.A total of 16 pins are included in this LED driver.This results in a 250mA output current.This LED driver is self-contained in an econtainer with a capacity of Peripheral Drivers.In this case, the power supply is 3/5V.The supply voltage should be set at 5.5V for best efficiency.A maximum input voltage of 5.5V volts can be applied to it.A minimum input voltage of 2.7V volts is required for this LED driver.
TPS2097DR Features
Supplied from 3.3V
TPS2097DR Applications
There are a lot of Texas Instruments TPS2097DR Power Switches ICs applications.
- Wireless Headsets
- USB3.1 Power Delivery
- Smartphone and PDA
- Notebook PC
- USB Ports/Hubs
- Portable Video Game Players
- Hot-Swap Systems
- Portable Music Players
- Set-top-box
- Solid-State Drives
