TPS2097DRG4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Weight | 155.100241mg |
| Operating Temperature | 0°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| Feature | Status Flag |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Subcategory | Peripheral Drivers |
| Technology | MOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 4 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | TPS2097 |
| Pin Count | 16 |
| Number of Outputs | 4 |
| Qualification Status | Not Qualified |
| Output Type | N-Channel |
| Operating Supply Voltage | 5.5V |
| Power Supplies | 3/5V |
| Interface | On/Off |
| Current - Output (Max) | 250mA |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Quiescent Current | 85μA |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Min Input Voltage | 2.7V |
| Max Input Voltage | 5.5V |
| Nominal Input Voltage | 5.5V |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 2.7V~5.5V |
| Driver Number of Bits | 4 |
| Fault Protection | Current Limiting (Fixed), Over Temperature, UVLO |
| Turn On Time | 20000 µs |
| Output Peak Current Limit-Nom | 0.5A |
| Rds On (Typ) | 80m Ω |
| Built-in Protections | OVER CURRENT; THERMAL; UNDER VOLTAGE |
| Output Current Flow Direction | SINK |
| Height Seated (Max) | 1.75mm |
| Length | 9.9mm |
| Width | 3.9mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS2097DRG4 Overview
It is package in Tape & Reel (TR) case.The 16-SOIC (0.154, 3.90mm Width) package includes it.The mounting type of the LED driver is Surface Mount.There is a switch type of General Purpose.To ensure reliable performance, the temperature should be set to 0°C~125°C TJ.The LED driver is equipped with 4 outputs.The LED driving board operates at Not Required volts.A maximum output voltage of N-Channel volts can be obtained with this LED driver.There are Status Flag features available on the LED driving board.It belongs to the family TPS2097.As a result, there are 16 terminations.The 16 pins are used to operate the LED driver.It consists of 4 functions.The LED driver output is limited to 250mAV.It is possible to achieve a high level of efficiency with a supply voltage of 3.3V.The lighting driver is mounted in the way of Surface Mount.16 pins are connected to it in total.Self-contained LED driver with Peripheral Drivers capacity in an econtainer.This part has a power supply of 3/5V.When using this LED driving board, it is recommended that the supply voltage is set to 5.5V.Its maximum input voltage is 5.5V volts.A voltage of 2.7V volts is the minimum input voltage.
TPS2097DRG4 Features
Supplied from 3.3V
TPS2097DRG4 Applications
There are a lot of Texas Instruments TPS2097DRG4 Power Switches ICs applications.
- Mobile Communication Devices
- USB Power Distribution
- Wireless Headsets
- USB Power Distribution
- Wireless/Networking Cards
- Telecom and Network Systems
- Set-Top Boxes
- Portable Video Game Players
- Hard Disk Drives
- Storage (HDDs, SSDs)
