TPS2101D
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Weight | 75.891673mg |
| Operating Temperature | -40°C~70°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Source Selector Switch |
| Resistance | 1.3Ohm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Applications | Handheld/Mobile Devices |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 568mW |
| Voltage - Supply | 2.7V~4V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Base Part Number | TPS2101 |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Max Output Current | 500mA |
| Operating Supply Voltage | 4V |
| Supply Voltage-Max (Vsup) | 4V |
| Number of Channels | 2 |
| Current - Output (Max) | 500mA 10mA |
| Nominal Supply Current | 10μA |
| Power Dissipation | 568mW |
| Output Current | 500mA |
| Max Supply Current | 16μA |
| Adjustable Threshold | NO |
| Propagation Delay | 370 μs |
| Turn On Delay Time | 370 μs |
| Min Input Voltage | 2.7V |
| FET Type | N and P-Channel |
| Number of Inputs | 2 |
| Max Input Voltage | 4V |
| Nominal Input Voltage | 4V |
| Ratio - Input:Output | 2:1 |
| Internal Switch(s) | Yes |
| Current - Output 2 | 10mA |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS2101D Overview
The case is 8-SOIC (0.154, 3.90mm Width)-shaped. In this case, it is suitable to pack the part in a Tube case. There are two ways in which this part is mounted. An electric current of 2.7V~4V is applied to it. It must not be possible for this component to operate at -40°C~70°C°C as its minimum operating temperature. Suitable for components connected in Handheld/Mobile Devices. The device is categorized as Source Selector Switch. The FET type can be recognized as N and P-Channel. There are 8 terminations available in the part. 8 pins are used in the design of this product. As you can see, this part is based on TPS2101. To deliver its performance, it's powered by the 3.3V platform. For 260, the peak reflow temperature of this part is used. A Power Management Circuits family part is involved in the project. There are 8 pins in the part. 4V represents the maximum supply voltage (Vsup). There are 1 outputs. Chips can work when the output current carries under 500mA 10mA. An input voltage of more than 4V V can be used with the chip. There are only a few chips on the market that can be used with an input voltage lower than 2.7V volts. The part is capable of being delivered under 500mA output current. There is a specific output current that can be delivered to the component, which is called 500mA. The device can be operated with a voltage supply of 4V on the supply line. During the running of the part, 2 inputs must be provided. 1.3Ohm is the range in which the device's resistance should remain.
TPS2101D Features
in a 8-SOIC (0.154, 3.90mm Width) case
FET Type: N and P-Channel
8 terminations
Peak Reflow Temperature (Cel) : 260
1 outputs
operate supply voltage at 4V
2 inputs
TPS2101D Applications
There are a lot of Texas Instruments TPS2101D Ideal Diode controller applications.
- Automotive USB hubs
- PCs
- Automotive infotainment systems - head unit,telematics control unit
- Electricity meters
- MP3 Players
- Power Tools
- Factory automation and control - PLC digital output modules
- Motor drives
- AC Rectifier
- Active ORing for redundant power
