Parameters |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
SC-74A, SOT-753 |
Number of Pins |
5 |
Weight |
13.012431mg |
Operating Temperature |
-40°C~70°C |
Packaging |
Tape & Reel (TR) |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Discontinued |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
5 |
ECCN Code |
EAR99 |
Type |
Source Selector Switch |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Applications |
Handheld/Mobile Devices |
Subcategory |
Power Management Circuits |
Voltage - Supply |
2.7V~4V |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
3.3V |
Base Part Number |
TPS2102 |
Pin Count |
5 |
Number of Outputs |
1 |
Max Output Current |
100mA |
Operating Supply Voltage |
4V |
Supply Voltage-Max (Vsup) |
4V |
Power Supplies |
3.3V |
Number of Channels |
1 |
Operating Supply Current |
14μA |
Current - Output (Max) |
500mA 100mA |
Output Current |
100mA |
Adjustable Threshold |
NO |
Min Input Voltage |
2.7V |
FET Type |
N and P-Channel |
Number of Inputs |
2 |
Max Input Voltage |
4V |
Nominal Input Voltage |
4V |
Ratio - Input:Output |
2:1 |
Internal Switch(s) |
Yes |
Screening Level |
MIL-STD-883 |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Contains Lead |
TPS2102DBVT Overview
The case is made of SC-74A, SOT-753 plastic. The Tape & Reel (TR) case is ideal for packing the part. Surface Mount is the way the part is mounted. We give it a voltage of 2.7V~4V in order to test it. There must not be a minimum operating temperature of -40°C~70°C for this component. There is a perfect fit between it and the component connected in Handheld/Mobile Devices. As far as the device classification is concerned, it falls under the Source Selector Switch category. In the case of FETs, N and P-Channel is recognized as the type. In this part, there are 5 terminations. The device is designed with 5 pins. Using TPS2102 as a basis, the part is constructed. Performance is delivered through 3.3V. To run 260, we use the peak reflow temperature of this part. The part is from Power Management Circuits family. There are 5 pins in the part. There is a limit to the maximum supply voltage when Vsup reaches 4V. The supply current used for its operating is 14μA. 3.3V is the voltage it can deliver. 1 outputs are available in the system. In order to achieve the best results, it is recommended that this part be mounted by the Surface Mount axis. A chip can work if the output current conducts under a certain value called 500mA 100mA. This chip can be used with an input voltage of more than 4V volts without any problems. There are only a few chips on the market that can be used with an input voltage lower than 2.7V volts. The part is capable of being delivered under 100mA output current. This component can deliver 100mA output currents. There is no problem operating this device with a supply voltage of 4V. Runs on 2 inputs.
TPS2102DBVT Features
in a SC-74A, SOT-753 case
FET Type: N and P-Channel
5 terminations
Peak Reflow Temperature (Cel) : 260
1 outputs
operate supply voltage at 4V
2 inputs
TPS2102DBVT Applications
There are a lot of Texas Instruments TPS2102DBVT Ideal Diode controller applications.
- AC Rectifier
- Automotive battery protection
- Electronic point of sale
- Industrial transport
- Active ORing for redundant power supplies
- Asset tracker
- MP3 Players
- Cell phones
- ADAS domain controller
- PDAs