TPS2104DBVT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Number of Pins | 5 |
| Weight | 13.012431mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Cut Tape (CT) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| Type | Source Selector Switch |
| Resistance | 435mOhm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Applications | Handheld/Mobile Devices |
| Subcategory | Power Management Circuits |
| Voltage - Supply | 2.7V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | TPS2104 |
| Pin Count | 5 |
| Number of Outputs | 1 |
| Max Output Current | 100mA |
| Operating Supply Voltage | 5.5V |
| Number of Channels | 2 |
| Operating Supply Current | 18μA |
| Current - Output (Max) | 500mA 100mA |
| Output Current | 500mA |
| Min Input Voltage | 2.7V |
| FET Type | N and P-Channel |
| Number of Inputs | 2 |
| Max Input Voltage | 5.5V |
| Nominal Input Voltage | 5.5V |
| Ratio - Input:Output | 2:1 |
| Internal Switch(s) | Yes |
| Height | 1.45mm |
| Length | 2.9mm |
| Width | 1.6mm |
| Thickness | 1.2mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS2104DBVT Overview
The case is made of SC-74A, SOT-753 plastic. Packing the part in Cut Tape (CT) cases is ideal. In this case, the part is mounted in the Surface Mount direction. The voltage that is applied to the circuit is 2.7V~5.5V. There must not be a minimum operating temperature of -40°C~85°C for this component. A component connected in Handheld/Mobile Devices would be a good fit for it. There is a Source Selector Switch classification for the device. As far as FET types are concerned, N and P-Channel can be recognized. Among the options available for the part are 5 terminations. 5 pins are used in the design. It is based on TPS2104. The performance of this device is powered by 5V. The peak reflow temperature of this part is used to run 260 on it. This part is part of the Power Management Circuits family of parts. As you can see, the part is equipped with 5 pins. The supply current used for its operating is 18μA. As part of the outputs, there is a 1 output. Parts should be mounted Surface Mount-wise. It is possible for the chip to function when the output current conducts under the 500mA 100mA axis. It is possible to use the chip with voltages greater than 5.5V volts. There are only a few chips on the market that can be used with an input voltage lower than 2.7V volts. The part can be delivered under 100mA output current. 500mA is the output current that can be delivered to the component in terms of its output voltage. In order for this device to function, it requires a supply voltage of 5.5V. For this part to run, 2 inputs are required. 435mOhm is the range in which the device's resistance should remain.
TPS2104DBVT Features
in a SC-74A, SOT-753 case
FET Type: N and P-Channel
5 terminations
Peak Reflow Temperature (Cel) : 260
1 outputs
operate supply voltage at 5.5V
2 inputs
TPS2104DBVT Applications
There are a lot of Texas Instruments TPS2104DBVT Ideal Diode controller applications.
- Industrial motor drives
- PCs
- AC Rectifier
- Alternator
- Motor drives
- Automotive battery protection
- Automotive infotainment systems - head unit,telematics control unit
- Power supply reverse polarity protection
- ADAS domain controller
- Power Tools
